Sony FH-C33X Operating Instructions Manual page 8

fi ee Le ||
Playing the Entire CD
(normal play)
POWER—ON
DISC 1-5
DISC SKIP
TIME
1 Insert the CD(s) in the disc tray(s).
2 Press CONTINUE to choose whether to
play one CD (1 DISC) or all CDs (ALL
DISCS).
3 Press p> or DISC 1 — 5 (or CD J on
the remote commander).
Play starts from the beginning of the
selected CD (whose disc tray indicator is
green).
Track
number Music calendar
Disc Playing Time
number
Chapter 2: the CD Player
4 Adjust the volume.
Turn VOLUME clockwise to turn up the
volume, or counterclockwise to tum
down. (Or press VOL +/- on the
remote commander.)
to. Press
Stop play |
Pause ul
Resume play Bor
" Remove the CD OPEN/CLOSE &
One Touch Play feature
Press pe on the CD player (or CD B» on
the remote commander) when the power is
off. When a CD is in the player, you will
be able to start listening to the CD without
pressing any other buttons. If no CD is
inserted, the system will just turn on.
If pe is pressed when there are no discs in
the player, then the first disc tray will
emerge, whether the power is on or not.
Note
If the CD player has been in the normal
play mode, you can select the CD player by
pressing pe or the DISC 1 — 5 buttons
(Automatic Source Selection).
If the CD player has been in the
programme play or the shuffle play mode,
only p> can be used for this function.
Selecting a Desired CD
You can locate the beginning of any CD
during play or pause, or when the player is
stopped.
To locate the beginning of a
particular CD and start playing
Press the corresponding DISC 1 — 5 button.
During normal play mode, CD play starts.
To change to the next CD
Press DISC SKIP on the remote commander.
During play, the player selects the next CD
and starts playing.
During stop or pause, the player selects the
next CD and enters stop or pause mode.
To find the beginning of a track
— Automatic Music Sensor (AMS)
You can locate the beginning of a track
while the track is playing or while it's in
pause mode.
To locate the beginning of the current or
preceding track, press KK] <q (or ké<q on
the remote commander) repeatedly until
you find the track you want.
To locate the beginning of the succeeding
track, press BR D>] (or PPI on the remote
commander) repeatedly until you find the
track you want.
To find a point in a track
You can find a particular point in a track
while the track is playing or while it's in
pause mode. Use the buttons on the CD
player to operate this feature.
To Do this
Go forward Hold down ppp] and
quickly in a release it at the desired point.
track
Go backwards Hold down (k<]<qaq and
quickly in a release it at the desired point.
track
Search quickly Press gg and hold down
without I<i<d <q or BEY. Press
listening be or fl again at the desired
point.
To check the remaining or total
playing time
Use the TIME button on the remote
commander.
To check Press
Remaining time TIME once during, play
in a track
Remaining time TIME twice during play of
on the CD the tracks left
(displayed only in the
normal play mode)
Disc number
play
Disc number,
total number of
tracks and total
playing time
appears for a few seconds
Notes
¢You cannot check the total playing time
during programme play.
The disc number, total playing time and
number of tracks also appear in the
display when you press OPEN/CLOSE &
to close the disc tray.