Pioneer VSX-D903S Operating Instructions Manual page 36

REMOTE CONTROL OPERATION
Button functions are the same as PIONEER's unified remote control
code functions, so refer to page 32 concerning TV functions, and
page 31 concerning VCR functions.
NOTE:
® /f there is a remote contro! operation button for a function your TV
or VCR does not have, operation is not possible.
® Depending on the kind of remote control signal, it may not be
possible to preset TV FUNC button for TV operation.
® The PIONEER remote control code remains in the TVDISP. 11, and 12
buttons, and the VCR DISP. 1 to 12 buttons without presetting.
[Procedure for presetting]
1, Press the EDIT button to switch to the EDIT mode.
2. Press one of the CONTROL MODE buttons (VCR 1, VCR 2, or TV).
3. Press one of the buttons 1 to 12.
® One kind of code is preset.
® To continue presetting, repeat operation procedure 2, 3.
4, Press the EDIT button.
® The EDIT mode is canceled.
5, Confirm that the component (TV or VCR) can be operated by
the preset code.
If operation is not possible, repeat the procedure from step 2, and
press a different number button (1—12} at step 3 to search for a
preset code that enabies operation. Refer to the diagram on this
page.
[Operation example]
As a preset example, here is an explanation of how to preset in VCR 1.
1. Press the EDIT button.
® The VCR 1, VCR 2, and TV CONTROL MODE buttons flash in
sequence.
2. Press the VCR 1 CONTROL MODE button.
* Only the VCR 1 button flashes.
3. Press one of the buttons 1 to 12,
*For example, if you press button 1, the remote control signal
format selected with VCR 1 operation button 1 is preset.
The CONTROL MODE buttons light in sequence (indicating that
registration has been completed), and then the VCR 1, VCR 2,
and TV buttons flash in sequence. (Returning to the condition in
procedure 1.)
® To continue presetting for VCR 2 and TV, repeat operation
procedures 2 and 3.
4, Press the EDIT button.
® The EDIT mode is canceled.
36
<ARB1489>
selecting a different number button (1 to 12} at step 3.
If there is a button among buttons.1 to 12 that cannot operate,
press the EDIT button once more to cancel the EDIT mode, and
memorize in the LEARN mode.
NOTE:
e After presetting, you can use the LEARN mode to. memorize a
command in a preset button, but the preset signal is erased.
Manufacturer Tv VCR |
RCA
1, (10)
(1), (6)
ZENITH
3
(3), (4)
GE 8, (11), (1) (1), (8)
SONY
4
4
TOSHIBA
5
5, (9)
HITACHI
6, (10)
6
PHILIPS
7
-
uve
-
7
PANASONIC 8 8
MITSUBISHI 9, (10) c)
SANYO
-
10, (12)
SHARP
(2)
2
GOLD STAR
(10)
(11)
MAGNAVOX
(7), (10), (12)
(8), (9)
SYLVANIA
(7), (10), (12)
(8), (9)
QUASER 8 8
FISHER
—
12, (10)
WARD'S (2), (7), (10), (11) (2)