Table of Contents
Advertisement
FRONT PANEL. FACILITIES
@ Remote sensor
@ POWER STANDBY/ON switch/STANDBY indicator
This is the switch for electric power.
ON
: When set to the ON position, power is supplied and
the unit becomes operational.
: When set to STANDBY
position, the main power
flow is cut and the unit is no longer fully operational.
A minute flow of power feeds the unit to maintain
operation readiness.
The STANDBY indicator lights when the power is STANDBY, and
goes out during ON.
[Timer ON/OFF possible]
means of the optional timer.
NOTE:
prevent sound from being output for about 5 seconds.
STANDBY
18
<ARB1489>
@ RESET button
Use this when normal operation becomes impossible because of
external influences such as static electricity or lightning, or when
operation is impossible even when operation buttons are pressed.
Press this button to return to normal operating conditions.
(The
input selector automatically switches to TUNER, and SPEAKERS A
and 8 switch off.)
If you press this button when the power is ON, the unit switches to
POWER STANDBY.
@®AUTO
SOURCE
CONTROL/MEMORY
buttons
(See page 26)
1, 2 buttons:
These
buttons
are
for memorizing
and
recalling
your
current
settings. Both 1 and 2 can be used to memorize settings. if you
connect another component, such as a CD player, to the CONTROL
OUT jack on the rear panel, the signals to switch power on and start
play are also transmitted.
MEMORY:
Use when memorizing settings to a 1, 2 button.
Advertisement
Table of Contents
