While the power ison, a nd there isaproblem with the TV, the TVchanges towarning
mode and informs you ofthe problem using t he LED asfollows. Then, the power turns o ff
automatically
and performs
the cooling forapproximately
90seconds.
The LAMP L ED blinks
Condition: Itmay b ea malfunction
ofthe internal electrical
circuits.
Tocorrect: Keep the TVoff f orawhile a nd then turn the power onagain. Ifthe TVgoes i nto
warning mode, unptug the TVafter the cooling has completed
and consult your
dealer.
The POWER LED blinks
Condition: Itmay b ea malfunction
ofthe internal electrical
circuits.
Tocorrect: Keep the TVoff f orawhile a nd then turn the power onagain. Ifthe TVgoes i nto
warning mode, unptug the TVafter the cool down a scompleted
and consutt your
dealer.
The POWER LED and LAMP L ED blink alternately
Condition: The inside temperature
rises a bnormally
orthe fan may b eblocked.
Tocorrect: Keep the TVoff f orawhile a nd then turn the power onagain. Ifthe TVgoes i nto
warning mode, unptug the TVafter the coot down a scompleted
and consult your
dealer.
The POW_=R
LED and LAMP LED blink rapidly
simultaneously
Condition:
The tamp unit has been installed on a slant and is not flat, or it is not fulty inserted
into the tamp housing.
Or it may be a tamp malfunction.
To correct:
• If this condition occurs soon after replacing the tamp: Reinstall the new tamp unit.
Repeat the lamp installation steps, taking care to observe all warnings.
Make
sure the tamp sits FLAT inside the unit when you reinstall it.
• tf this condition occurs except for replacing the tamp: Keep the TV oft for a while
and then turn the power on again,
tf the TV goes into warning mode, unplug the
TV after the coot down as completed and consult your dealer.