JVC HD-ILA HD-61Z585 User Manual page 47

The DIGITAL-IN option can only b edisplayed inthe INITIAL SETUP menu when a HDMI480p
picture signat isbeing i nput tothe DIGITAL-IN terminal. This option a djusts the position when
aHDMt orDVI 480p p icture signal isbeing d isplayed onthe screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. tfthe displayed picture isslightly shifted, the
position can beadjusted byselecting either SIZE1 orSIZE2.
_._,p Press the MENU button
AV ToDIGtTALqN
4_ To enter
_," To select SIZE1 orSIZE2
(_ Press the MENU button tofinish
Note:
_PREVIOUS
TV SPEAKER _ ON _]
AUDIO OUT
_VAR_J
IDiG FYALqN _ SIZE1
D_GITAUIN AUDIO _ DIGITAL_
CENTER CH INPUT _OPF _J
_NEXTPAGE
• The DIGITAL-IN menu can only be displayed when a HDMI or DV! 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
This feature is used if you have a DTV or HDM!
compatible component connected to your TV.
Press the MENU button
.&T To DIGITAL-IN AUDIO
4 _ To select 'ANALOG" or 'DIGITAL"
Press the Menu button when finished
Notes:
PREVIOUS
"iV SPFAKER _ ON _J
AUDIO OUT
DIGITALqN
DIGITAL-IN AUDIO _ DIGITAL _
CENTER CH INPUT
NEXT PAGE
tf your DTV or HDMt component is capable of digital audio and video, choose DIGITAL. If
your DTV or HDMI component is capabte of analog audio and digital video, choose ANALOG.
Refer to your DTV or HDM! component*s instruction manual for more information.
q
When you are using a surround system, you can substitute the speaker of this television for
the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the
speaker as the center speaker of your surround system. It is possible to tock the volume when
it is ON separately from the volume when it is OFF.
Press the MENUbutton
,&Y To CENTER CH INPUT
_ To adjust CENTER CH INPUT to 'ON" or 'OFF"
Press the MENUbutton when finished
2J:
*PREVIOUS
DIGITALqN AUDIO 4 DIGITAL _ I
I CENTER CH iNPUT _OFF
_NEXTPAGE