Press the ASPECT
button
•
By pressing the ASPECTbutton, you can change the size.
When you change the aspect ratios, it is different from their broadcast or recorded program.
NTSC, 480i, 480p
HD (1080i, 720p)
Notes:
• You can also choose the size by pressing the ,AV
buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT PANEL CONTROL screen by using the MENUbutton on
the side of the TV instead of the remote control.
It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing MENU'_ on the side panel and choose a mode by using the CHANNEL
+/- buttons ( _ OPERATE
_ ).
The MENUbutton allows you to access JVC*s onscreen menu system. Press MENU to activate
the onscreen menu system.
• See individual topics like 'Sound Adjust" for specific information
on using menus.
e
I
This button confirms your selection when you are in one of the onscreen menus.
This button allows you to go back in the menu to change a selection
or correct a mistake.
Use these buttons to move up or down all the available channels your TV is able to receive.
•
-
I
Use these buttons to raise or lower the TV*s volume level.