JVC HD-ILA HD-61Z585 User Manual page 16

Connecting to JVC AV Compu Link
JVC's AV C 3mpt Link feature makes piaying viaeo [apes or DVDs totaIty automatic. S_mply
insert a pre-recoraea tape into your JVC brand VCR or DVD into your JVC DVD player ann
[ne device wut au[omattcafly turn on and begin playback. At the same [_me. using me
AV CompuunK. [ne VCR or DVD pJayer sends a s_gnal to the television telhng _tto turn on
and switch to the proper wdeo inpu[.
° The AV CompuLink cabte ma_ be inctuded with the JVC AV CompuL_nk unit jo_
wish to connect. If it is not contact JVC Parts Depar[men[ a[ (,800}-882-2345. oF
www.jvcserwce.com for part # EWP 805-012.
o AV CompuLink can onlj be used with JVC brand proauc[s.
AV CompuLink Cable
To Connect: Plug one end of the AV CompuLink cable
into the AV COMPULtNK INPUT on your VCR, DVD,
or other CompuLink device. Plug the other end of the
AV CompuLink cable into the AV COMPULINK at the
rear of the television.
Note:
• The AV CompuLink cable has a male 3.5 mm (mono)
plug on each end.
TV Rear Panel
VCR
@-® ® @OUT
AV CompuLink
Notes:
• tn order for the VCR playback to begin automatically, the recording tabs must be removed
from the VHS tape. If the tab is in place, automatic switching wilt occur when you push the
VCR_s PLAY
button.
• tf your JVC brand VCR has "A code/B code remote control switching" (see your VCR*s
instruction book), using VCRA code wilt switch the TV to input 1.
• Refer to your DVD instruction book for detailed connection information.
• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see
the receiver connection instructions for detailed connection information.
• AV CompuLink is compatible with setect AV CompuLink receivers.