JVC HD-ILA HD-61Z585 User Manual page 19

Connecdng to a Digital TV Receiver
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in
their digital form.
TV Rear Panel
DTV Decoder fc_r_c-_ I
After the connections have been made,
tighten the screw to secure the cables
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to
the DIGITAL-IN on the back of your television.
2) Connect a red cable from the DTV decoder RtGHTAUD!O OUT, to the RIGHTAUD!O DtGP
TALqN on the back of your television.
3) Connect a white cable from the DTV decoder LEFTAUDtO OUT, to the LEFTAUD!O DIGP
TALqN on the back of your television.
• The digital-in terminal is not compatible with the picture signal of a personal computer.
• Use a HDMt to DVl cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
• tf 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the "DIGITAL-IN" in the initial setup menu to adjust it. (Refer
to page 47.)
• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to
ANALOG. See "DIGITALqN AUDIO", page 47.