JVC HD-ILA HD-61Z585 User Manual page 24

Auto Tuner Setup
In auto tuner setup, the TV automatically scans through atl available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL+/-- buttons) you will receive only clear, active channels.
TUNER MODE _CABLE_
_START
I2
To choose CABLE or AIR (or SKIP when
you skip Auto Tuner Setup)
To START
Press the OK button
Programming will take approximately 1 to 2
minutes.
When the setup is finished, THANK YOU!! SETUP tS NOW COMPLETE is displayed. Your
quick setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• Noise muting will not work during Auto Tuner Setup.
• Skip appears only for interactive plug-in menu.
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending
on the type of hookup), have only 1 channel, usualty 3 or 4 in the auto tuner memory. This is
normal.