TIP
Add oil a little at a time so as not to overfill be-
yond the maximum level mark.
7. Check the O-ring for damage, and re-
place it if necessary.
8. Install the engine oil tank filler cap.
9. Install the panel.
To change the engine oil
1. Park the vehicle on a level surface.
2. Remove panel D. (See page 9-10.)
3. Remove the engine oil tank cover by re-
moving the bolts.
9
1. Engine oil tank cover
2. Bolt
4. Start the engine, warm it up for several
minutes, and then turn it off.
5. Remove the engine oil tank filler cap and
the cylinder head cap.
9-18
2
1