1. Panel B
2. Install the passenger seat by installing the
bolts, and then tighten them to the spec-
ified torque.
Tightening torque:
9
Passenger seat bolt:
32 N·m (3.2 kgf·m, 24 lb·ft)
TIP
Make sure that the seat frame is properly
secured.
Place the passenger seat belt in the original
position.
3. Install the passenger seat cushion.
4. Install the top cover by installing the bolts
and quick fastener screw.
5. Install panel A and the hood.
1
Panels C and D
To remove a panel
1. Pull the tab on the panel lock up, and
then turn the panel lock 1/4 turn clock-
wise.
9-14