Honda FC600 Owner's Manual page 45

STORAGE
Engine Oil
. Change the engine oil|(see page 29).
2. Remove the spark plug| (see page 34).
3. Pour a teaspoon (5 - 10 cm?) of clean engine oil into the cylinder.
—
4. Pull the starter grip several times to distribute the oil in the cylinder.
5. Reinstall the spark plug.
6. Pull the starter grip slowly until resistance is felt, and the notch on the
starter pulley aligns with the hole а the top of the recoil starter cover. This
will close the valves, so moisture cannot enter the engine cylinder.
Return the starter grip gently.
Align the notch on the starter
pulley with the hole at the top of
recoil starter.
43