Connect Peripheral Equipment; Connecting And Selecting Equipment; Video Recorder - Philips 28PW9617 Instruction Manual

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.

Video recorder

Connect the aerial cables
optimum picture quality, eurocable
CABLE
1
2
3
VCR 1
If your video recorder is provided with the EasyLink function, the
eurocable supplied with it should be connected to
to benefit from the EasyLink functionality.
EXTERNAL 2
If the eurocable is not used the following steps are
required:
Search for and store the test signal of the video
recorder
Unplug the aerial cable
your video recorder.
Switch on your TV and put the video recorder on the test
signal. (See the handbook for your video recorder.)
Search for the test signal of your video recorder in the
same way as you searched for and stored the TV signals.
See Installation, Searching for and storing TV channels,
Manual Installation, p. 6.
Store the test signal under programme number 0 or
between 90 and 99.
Replace the aerial cable in the aerial socket
video recorder after you have stored the test signal.
, and, to obtain the
as shown below.
2
EXTERNAL
4
from the aerial socket
of your
Decoder and video recorder
Connect a eurocable
special euroconnector of your video recorder. See also
the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 8.
You can also connect your decoder directly to
EXTERNAL 1
Video recorder and other equipment
(except Digital Sources)
CABLE
1
4
Connect the aerial cables
of
Better picture quality can be obtained if you also connect
eurocable
EXTERNAL 1
Look for the test signal of your peripheral in the same
way as you do for a video recorder.
When a video recorder is connected to
only record a programme from your TV.
Only when a video recorder is connected to
possible to record a programme from your TV as well as from
other connected equipment. See Record with your video
recorder, p. 33.
Note:
EXTERNAL 1
CVBS,Y/C and RGB,
It is preferred to connect peripherals with RGB output to
EXTERNAL 1
Connect Peripheral Equipment
to your decoder and to the
or with a eurocable.
2
EXTERNAL
1 2
3
5
2
VCR 1
, and
to and a eurocable
EXTERNAL 2
, or .
3 4
EXTERNAL 1
can handle CVBS and RGB,
and only CVBS.
EXTERNAL 3 4
or as RGB provides a better picture quality.
2
as shown.
to
you can
it is
EXTERNAL 2
EXTERNAL 2
27