56EN
USING THE REMOTE CONTROL UNIT
The Full-Function
Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, ffause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible. (_::_ pg. 58)
For GR-DVS00/500
owners:
If you want to perform Random Assemble Editing
(r_ pg. 60 - 65), use the optional
RM-V700U
remote control
Installing The Batteries
RM-V717U (providedwith GR-DV900 only)
The remote control uses two "AAA (R03)" size
batteries. Refer to "General Battery Precautions
(GR-DV900 only)" (_-_pg. 74).
]
Remove the battery compartment cover while
pushing up the tab as illustrated.
2 Insert two "AAA (R03)" size batteries in the
correct direction.
3 Re-attach the battery compartment cover.
11
Insert the minus (-) end first.
Install The Battery
RM-V718U (providedwith GR-DV800/500 only)
The remote control uses one lithium battery
(CR2025).
1
Pull out the battery holder by inserting a pointed
instrument into the slot.
2 insert the battery in the holder, and be sure to
have the "+" mark visible.
3 Slide the holder back in until you hear a click.
InstallingThe Battery
RM-V7OOU(optional)
The remote control uses one lithium battery
(CR2025).
1 There are 2 ways to pull the battery holder out of
the RM-V700U.
I_ Pull out the battery holder while sliding the
lock hole.
I_1 Pinch the release tab and pull out the battery
holden
2
Insert the baRery in the hdder, and be sure to
have the "+" mark visible.
3 Slide the holder back in until you hear a click.
Beam Effective A rea(indoor u se)
When using the
remote control, be
sure to point it at the
remote sensor. The
transmitted beam's
approximate effective
distance for indoor
use is 5 m (16 [t).
Remote sensor
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor is
directly exposed to sunlight or powerful lighting.