Table of Contents
Advertisement
EN
I Dubbing StillImages Recorded On
A Tape ToA Memory Card
Sti!t images can be dubbed from a tape to a memory
card.
MENU Wheel
Button
Lock Button
Play/Pause Button
Switch
(_/11)
1
Load a cassette. (_ pg. 15)
2
Load a memory card. (_ pg. 16)
3 Set the VIDEO/MEMORY
Switch to "VIDEO'.
4 Set the Power Switch to "PLAY" while pressing
down the Lock Sutton located on the switch.
5 Set "17_ _.M COPY" to "ON'.
(:-_ pg. 31, 40)
6
Press 1_/11 to start playback.
7 At the point you want to dub, press 1_/11 again to
engage Stir[ Playback.
8 To dub the image, press SNAPSHOT.
• The "_'_]"
indication appears during
dubbing.
• The selected image is stored in the memory
card.
@OTESt
• If SNAPSHOT is pressed in step 8 when a memory
card is not loaded, the message "COPYING
FAILED" is displayed.
• If an image recorded on the tape using "WIDE
MODE" (__ pg. 37) is clubbed to a memory card,
the WIDE mode identifying signal is not dubbed
with it.
• To use Playback Special effects with a video image
you wish to club, perform up to step 8 using the
remote control (provided). (__ pg. 58)
• Images are dubbed in 640 x 480 pixels.
Advertisement
Table of Contents
