Table of Contents
Advertisement
36 EN
RECORDING MENUS (conE..)
| Manual M enu
_1 MANUAL
Digital I mage Stabilization
To compensate for unstabte images caused by
camera-shake, particularly at high magnification.
DIS
(Factory-preset: ON)
OFF / ON [_11_
NOTES:
• Accurate stabilization
may not be possible if hand
shake is excessive, or under the following
conditions:
• When shooting subjects with vertical or
horizontal stripes.
• When shooting dark or dim subjects.
• When shooting subjects with excessive
backtighting.
• When shooting scenes with movement in
various directions.
• When shooting scenes with low-contrast
backgrounds.
• Switch offthis mode when recording with the
camcorder on a tripod.
• The "[_llJ" indicator blinks orgoes out if the
Stabilizer cannot be used.
Self-Timer
For details, refer to "Self-Timer" (_ pg. 43).
SELF-TIMER
(Factory-preset: OFF)
OFF/ON
_._
5-Second R ecording
Reco_ a vacation or an important event in 5-second
clips to keep the action moving. This function is
available onty for video recording.
1
Set
'_
5S to 5S.(
pg. 3t)
• "5S" appears.
2
Press the Recording Start/Stop Button to start
recording, and after 5 seconds the camcorder
enters Record-Standby mode automatically.
• Even if you press the Recording Start/Stop
Button again within 5 seconds after recording
starts, Record-Standby mode is not engaged.
3 To exit the 5S mode, select "OFF" in step 1.
To take a snapshot in the 5-second recording
mode...
Instead of pressing the Recording Start/Stop Button
in step 2, select the desired Snapshot mode in
CAMERA Menu (_ pg. 35), then press SNAPSHOT.
The camcorder records a 5-second still. When "5S"
is set to "Anim.',
this function is not available,
5S
(Factory-preset: OFF)
OFF: Disables 5-Second Recording.
5S: Enables 5-Second Recording.
Anita.: Allows you to record a few frames only. By
using an inanimate object and changing its
position between shots, you can record the
subject as though it is moving.
NOTE:
When "5S" is set to "Anita.', the 5-Second
Recording mode is not available. Animation
recording of a few frames only is taken instead.
Maximum telephoto setting
Usually the distance to a subject where the lens is in
_cus depends on the zoom magnification.
Unless
there is a distance more than I m (3.3 if) to the
subject, the lens is out of focus at the maximum
telephoto setting.
TELE MACRO
(Factory-preset: OFF)
OFF: Disables the function.
ON: When set to "ON",
you can shoot a subject
as large as possible at a distance of approx. 60 cm
(2 ft).
NOTE:
Depending on the zoom position, the lens may go
out of focus.
Advertisement
Table of Contents
