Hide thumbs Also See for GR-DVX44EG:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
GR-DVX48A/A-S/EA,DVX49A,DVX78A/A-S/EA
Regarding service information other than these sections, refer to the GR-DVX44EG,DVX88EG service manual (No. 86617).
Also, be sure to note important safety precautions provided in the service manual.
SPECIFICATIONS
For General
Power supply
: DC 11.0 V } (Using AC Adapter)
DC 7.2 V } (Using battery pack)
Power consumption
LCD monitor off, viewfinder on
: Approx. 4.4 W (GR-DVX78), Approx. 4.0 W (GR-DVX49/DVX48)
LCD monitor on, viewfinder off
: Approx. 5.2 W (GR-DVX78), Approx. 4.8 W (GR-DVX49/DVX48)
Dimensions (W x H x D)
: 51 mm x 120 mm x 97 mm
(with the LCD monitor closed and the viewfinder pushed back in)
Weight
: Approx. 500 g (GR-DVX78)
Approx. 470 g (GR-DVX49/DVX48)
Operating temperature
: 0°C to 40°C
Operating humidity
: 35% to 80%
Storage temperature
: –20°C to 50°C
Pickup
: 1/4" CCD
Lens
: F 1.8, f = 3.6 mm to 36 mm, 10:1 power zoom lens
Filter diameter
: ø27 mm
LCD monitor
: 2.5" diagonally measured, LCD panel/TFT active matrix system
Viewfinder
: Electronic viewfinder with 0.44" colour LCD
Speaker
: Monaural
For Digital Video Camera
Format
: DV format (SD mode)
Signal format
: PAL standard
Recording/Playback format
: Video: Digital component recording
: Audio: PCM digital recording, 32 kHz 4-channel (12-bit),
48 kHz 2-channel (16-bit)
Cassette
: Mini DV cassette
Tape speed
: SP: 18.8 mm/s
LP: 12.5 mm/s
Maximum recording time
: SP: 80 min.
(using 80 min. cassette)
LP: 120 min.
For Digital Still Camera (GR-DVX78 only)
Storage media
: SD Memory Card/MultiMediaCard
Compression system
: Still image : JPEG (compatible)
Moving image : MPEG4 (compatible)
File size
: 2 modes (XGA: 1024 x 768 pixels/VGA: 640 x 480 pixels)
Picture quality
: 2 modes (FINE/STANDARD)
Approximate number of storable images
(with the provided memory card [8 MB], with Sound Effects pre-stored)
FINE
: 40 (VGA), 20 (XGA)
STANDARD
: 130 (VGA), 60 (XGA)
(with an optional memory card [16 MB])
FINE
: 100 (VGA), 40 (XGA)
STANDARD
: 290 (VGA), 140 (XGA)
(with an optional memory card [32 MB])
FINE
: 210 (VGA), 90 (XGA)
STANDARD
: 610 (VGA), 290 (XGA)
(with an optional memory card [64 MB])
FINE
: 430 (VGA), 190 (XGA)
STANDARD
: 1230 (VGA), 600 (XGA)
DIGITAL VIDEO CAMERA
(The specifications shown pertain specifically to the model GR-DVX78A/DVX49A/DVX48A/
DVX78EA/DVX48EA/DVX78SH/DVX48SH)
Camcorder
This service manual is printed on 100% recycled paper.
COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.
For Connectors
AV
: 1 V (p-p), 75 Ω, analogue
Video output
: 0.8 V (p-p) – 1.2 V (p-p), 75 Ω, analogue
Video input (GR-DVX78 only)
Audio output
: 300 mV (rms), 1 kΩ, analogue, stereo
Audio input (GR-DVX78 only)
: 300 mV (rms), 50 kΩ, analogue, stereo
Headphone output
(GR-DVX78 only)
: Stereo
DV
Input/output
: 4-pin, IEEE 1394 compliant
AC Adapter AP-V10A, AP-V10EA or AP-V10ED
Power requirement
: AC 110 V to 240 V`, 50 Hz/60 Hz
Output
: DC 11 V } , 1 A
Dimensions (W x H x D)
: 59 mm x 31 mm x 84 mm
Weight
: Approx. 140 g (not including Power Cord)
For General
Dimensions (W x H x D)
: 52 mm x 22 mm x 73 mm
Weight
: Approx. 35
For Connectors
USB (GR-DVX78 only)
: Type B
EDIT (GR-DVX78 only)
: ø3.5 mm, 2-pole
S-Video
: Y : 1 V (p-p), 75 Ω, analogue
Output
C : 0.29 V (p-p), 75 Ω, analogue
: Y : 0.8 V (p-p) – 1.2 V (p-p), 75 Ω, analogue
Input (GR-DVX78 only)
C : 0.2 V (p-p) – 0.4 V (p-p), 75 Ω, analogue
JLIP (GR-DVX49/DVX48 only)
: ø3.5 mm, 4-pole
PC (DIGITAL PHOTO)
(GR-DVX49/DVX48 only)
: ø2.5 mm, 3-pole
Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject
to change without notice.
Jack Box
No. 86643
May 2001

Advertisement

Table of Contents
loading

Summary of Contents for JVC GR-DVX44EG

  • Page 1 DIGITAL VIDEO CAMERA GR-DVX48A/A-S/EA,DVX49A,DVX78A/A-S/EA Regarding service information other than these sections, refer to the GR-DVX44EG,DVX88EG service manual (No. 86617). Also, be sure to note important safety precautions provided in the service manual. (The specifications shown pertain specifically to the model GR-DVX78A/DVX49A/DVX48A/...
  • Page 2 5. PARTS LIST (5-1 to 5-12) PACKING AND ACCESSORY ASSEMBLY <M1> ......................5-1 ELECTRICAL PARTS LIST (GR-DVX78A/A-S/EA) ...................... 5-3 MAIN BOARD ASSEMBLY <01> ............................5-3 The following table indicate main different points between models GR-DVX44EG, GR-DVX48A, GR-DVX48A-S, GR-DVX48EA and GR-DVX49A. MODEL GR-DVX44EG...
  • Page 3 MAIN BOARD ASSEMBLY <01> REF. MODEL GR-DVX44EG GR-DVX48A GR-DVX48A-S GR-DVX48EA GR-DVX49A ITEM IC1401 CSP IC ASSY YQ44887A *YQ44888A R1413 MG RESISTOR — *NRSA6AJ-331W R6014 MG RESISTOR — *NRSA63J-0R0X C3001 T CAPACITOR NBE20JM-106X *NBE80JM-106X C3005 T CAPACITOR NBE20JM-106X *NBE80JM-106X C3008 T CAPACITOR...
  • Page 4 FINAL ASSEMBLY <M2> REF. MODEL GR-DVX88EG GR-DVX78A GR-DVX78A-S GR-DVX78EA ITEM LOWER CASE ASSY LY20727-001A *LY20727-001B PLATE LY42906-003A LY42906-007A STICKER LY43130-002A LY43130-004A SPACER(A) LY30029-0H7B *LY30029-0H7C FRONT COVER ASSY LY20731-003B LY20731-001D 220H COVER(AV) LY32136-003A LY32136-006A SCREW QYSPSGT1740Z QYSPSGT1740R SCREW QYSPSGT1735Z *QYSPSGT1730Z SCREW QYSPSGT1735Z *QYSPSGT1730Z MAIN BOARD ASSEMBLY <01>...
  • Page 5 SECTION 5 PARTS LIST SAFETY PRECAUTION Parts identified by the symbol are critical for safety. Replace only with specified part numbers. PACKING AND ACCESSORY ASSEMBLY <M1> The instruction manual to be provided with this product will differ according to the destination. FINAL ASSY <M2>...
  • Page 6 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 7 ELECTRICAL PARTS LIST (GR-DVX78A/A-S/EA) REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 8 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 9 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 10 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 11 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 12 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 13 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 14 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 15 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 16 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 17 SECTION 4 CHARTS AND DIAGRAM JUNCTION CIRCUIT BOARD JUNCTION PWB FOIL SIDE ( B ) YB10323-01-02 JUNCTION PWB COMPONENT SIDE ( A ) YB10323-01-02...
  • Page 18 JACK CIRCUIT BOARD FOIL SIDE ( B ) JACK PWB YB10323-01-02 COMPONENT SIDE ( A ) JACK PWB YB10323-01-02 E. & O. E. No. 86643 (Sanwa)-M1D3S4/S8...
  • Page 19 SERVICE MANUAL DIGITAL VIDEO CAMERA GR-DVX44EG/EK,DVX77EG/EK,DVX88EG SPECIFICATIONS For Connectors Camcorder : 1 V (p-p), 75 Ω, analogue Video output For General Audio output : 300 mV (rms), 1 kΩ, analogue, stereo Power supply : DC 11.0 V } (Using AC Adapter) Headphone output DC 7.2 V } (Using battery pack)
  • Page 20: Table Of Contents

    [GR-DVX77EG/EK, GR-DVX88EG] ........4-9 JACK BOARD ASSEMBLY <09> ..........5-24 4.5 PC IF SCHEMATIC DIAGRAM [GR-DVX44EG/EK] ... 4-11 W/B BOARD ASSEMBLY <11> ..........5-24 The following table lists the differing points between Models GR-DVX44EG/EK, GR-DVX77EG/EK and GR-DVX88EG in this series. GR-DVX44EG GR-DVX44EK GR-DVX77EG...
  • Page 21 Important Safety Precautions Prior to shipment from the factory, JVC products are strictly inspected to conform with the recognized product safety and electrical codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally important to implement the following precautions when a set is being serviced.
  • Page 22 • Safety Check after Servicing Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and wires have been returned to original positions, Afterwards, perform the following tests and confirm the specified values in order to verify compliance with safety standards.
  • Page 23: Disassembly

    SECTION 1 DISASSEMBLY 1.1 BEFORE ASSEMBLY AND DISASSEMBLY 1.1.4 Disconnection of Connectors (Wires) 1.1.1 Precautions Connector Pull both ends of the connector in the arrow direction, re- 1. Be sure to remove the power supply unit prior to mount- move the lock and disconnect the flat wire. ing and soldering of parts.
  • Page 24: Jigs And Tools Required For Disassembly, Assembly And Adjustment

    1.2 JIGS AND TOOLS REQUIRED FOR DISASSEMBLY, 1.3 DISASSEMBLY/ASSEMBLY OF CABINET PARTS ASSEMBLY AND ADJUSTMENT AND BOARD ASSEMBLY 1.2.1 Tools required for adjustments 1.3.1 Disassembly flow chart This flowchart indicates the disassembly step for the cabi- Torque Driver YTU94088 YTU94088-003 net parts and board assembly in order to gain access to item(s) to be serviced.
  • Page 25: Disassembly Method

    1.3.2 Disassembly method NOTE Beware of electrical shock due to the capacitor during work. STEP Fig.No. PART POINT NOTE (GR-DVX77EG/EK and GR-DVX88EG) DECK OPE ASSY Fig.1-3-1 2(S1), (L1) — NOTE a: When disassembling the Front Cover Assembly, remove CN 1a the screws, pull out the studs and free the grip belt.
  • Page 26 LOCK (MONITOR) NOTE NOTE NOTE NOTE Fig. 1-3-3 Fig. 1-3-1 NOTE : 0.118N·m (1.2kgf·cm) : 0.098N·m (1.0kgf·cm) NOTE GRIP BELT NOTE COVER STUD (DV) (HOOK) HOOK Fig. 1-3-2...
  • Page 27 NOTE : 0.198N·m (2.0kgf·cm) Fig. 1-3-4 TAPE NOTE NOTE Fig. 1-3-5...
  • Page 28 : 0.147N·m (1.5kgf·cm) NOTE NOTE NOTE NOTE Fig. 1-3-6 Fig. 1-3-7 NOTE NOTE SWITCH NOTE <TOP VIEW> NOTE NOTE NOTE NOTE CN803(AUDIO) : 0.098N·m (1.0kgf·cm) Fig. 1-3-8...
  • Page 29 BRACKET (TOP) NOTE SWITCH SPACER NOTE : 0.098N·m (1.0kgf·cm) Fig. 1-3-9 NOTE BRACKET (MECHA) NOTE NOTE NOTE SHIELD PLATE NOTE Fig. 1-3-10...
  • Page 30: Disassembly Of 5 Monitor Assembly

    1.4 DISASSEMBLY OF 5 MONITOR ASSEMBLY b: Remove the MONITOR board assembly and Note backlight together unless it is needed to separate 1.4.1 5 Monitor assembly/Hinge assembly them from each other for part replacement, etc., 1. Remove the four screws (1-4). While opening the moni- because the two are soldered to each other.
  • Page 31: Disassembly Of 7 Op Block Assembly/Ccd Board Assembly

    1.5 DISASSEMBLY OF 7 OP BLOCK ASSEMBLY/CCD 1.5.3 How to install OP block assembly and CCD board BOARD ASSEMBLY assembly 1.5.1 Precautions 1. Install the optical LPF with the space rubber fitted to its CCD side in the OP block assembly. 1.
  • Page 32: Disassembly Of 9 E. Vf Assembly

    1.6 DISASSEMBLY OF 9 E. VF ASSEMBLY 1.6.1 9E. VF assembly Note a: When disassembling the E VF assembly, remove <Frame (VF)> the frame (VF) from the case/cap assembly de- 5. Remove the screw (5) first and then LCD module/holder pending on the situation.
  • Page 33: Emergency Display

    1.7 EMERGENCY DISPLAY Whenever some abnormal signal is input to the syscon CPU, Example (in case of the error number E01): an error number (E01, as an example) is displayed on the LCD monitor or (in the electronic view finder). In every error status, such the message as shown below alternately appear over and over.
  • Page 34: Service Note

    1.8 SERVICE NOTE 1-12...
  • Page 35: Mechanism Adjustment

    SECTION 2 MECHANISM ADJUSTMENT 2.1 PRELIMINARY REMARKS ON ADJUSTMENT AND (3) The symbol (T or B)appearing in this column shows the REPAIR side which the objective part is mounted on. T =the upper side, B =the lower side 2.1.1 Precautions (4) Symbols appearing in this column indicate drawing 1.
  • Page 36: Jigs And Tools Required For Disassembly, Assembly And Adjustment

    2.2 JIGS AND TOOLS REQUIRED FOR DISASSEMBLY, ASSEMBLY AND ADJUSTMENT 2.2.1 Tools required for adjustments 1. Torque Driver Torque Driver YTU94088 YTU94088-003 Be sure to use to fastening the mechanism and exterior parts because those parts must strictly be controlled for tightening torque.
  • Page 37: Disassembly/Assembly Of Mechanism Assembly

    2.3 DISASSEMBLY/ASSEMBLY OF MECHANISM <SUB CAM GEAR> ASSEMBLY 2.3.1 General statement The mechanism should generally be disassembled/assem- bled in the EJECT mode (ASSEMBLY mode). (Refer to Fig. 2-3-1.) TOP VIEW BOTTOM VIEW However, when the mechanism is removed from the main body, it is set in the STOP mode.
  • Page 38: Mechanism Timing Chart

    2.3.3 Mechanism timing chart MODE EJECT C IN SHORT FF STOP PLAY PARTS MAIN CAM (ø10.4) 31.7 45.6 49.5 74.04 129.5 156.6 169.2 211.5 280.3 SUB CAM (ø11) 43.1 46.8 122.5 148.1 ENCODER (ø10) 47.4 51.5 134.7 162.9 291.5 ROTARY ENCODER CAM SW SLIDE END...
  • Page 39: Disassembly/Assembly Of Mechanism Assembly

    2.4 DISASSEMBLY/ASSEMBLY OF MECHANISM ASSEMBLY 2.4.1 Follow chart 1. Configuration Mechanism assembly Cassette housing assembly Slide deck assembly Main deck assembly Fig. 2-4-1 2. Procedures for disassembly Mechanism assembly Cassette housing assembly Slide deck assembly Main deck assembly Fig. 2-4-2...
  • Page 40 3. Disassembling procedure table PART NAME FIG. POINT NOTE REMARKS A Cassette housing assembly Fig. 2-4-5 3(S1),(L1a)-(L1d) 1a, 1b, 1c, 1d Adjustment Reel disk (SUP) assembly Fig. 2-4-6 (W2) 2a, 2b Reel disk (TU) assembly Fig. 2-4-6 (W2) 2a, 2b Reel cover assembly Fig.
  • Page 41 < TOP VIEW > 4b 11b 11a Main deck assembly Slide deck assembly 7b 7a 7d 7e 9c 3c 3b 7h 2b Fig. 2-4-3 < BOTTOM VIEW > Main deck assembly Slide deck assembly Fig. 2-4-4...
  • Page 42: Disassembly/Assembly

    2.4.2 Disassembly/assembly Note 1a: <STOP mode> Shift the mechanism mode 1. A Cassette housing assembly from the STOP mode to the EJECT mode. Cassette Note 1b: housing Reassemble the cassette (L1b) assembly housing assembly to the (S1) mechanism as the cancel lever is moved in the direc- tion of the arrow.
  • Page 43 3. 3a Tension arm assembly/ 3b Release guide assembly 3c Idler arm assembly/ 3d Guide arm assembly 3e Pinch roller arm assembly Note 3a: When removing the reel cover assembly, pay heed to re- lease guide assembly and guide arm assembly. For, the (W3a) guide arm assembly is just inserted into the slide deck as- sembly from the upside and it is apt to come off after the...
  • Page 44 5. 5a Guide roller (S) assembly/ 5b Rail assembly Note 5a: When reassembling, insert the tip Guide roller of the guide roller with the coil (s) assembly spring put on it into the hole on the main deck. Tighten the guide roller by about 6 turns so that the Note 5a (P5)
  • Page 45 Note 7a: 7. 7a Loading brake assembly/ 7b Guide pin (S) Don’t remove these parts unreasonably. If they are removed 7c Pad arm assembly/ 7d Slide guide plate assembly for some reason, be very careful not to lose them. 7e Collar/ 7f Collar/ 7g Sub brake assembly 7h Control plate assembly Note 7b: When reinstalling the sub brake assembly, set the control...
  • Page 46 9. 9a Loading guide/ 9b Timing belt 9c Center gear assembly/ 9d Motor bracket assembly 9e Worm wheel/ 9f Gear holder Note 9a: Carefully handle the DEW sensor. (Don’t touch the sensor Note 9b Note 9a surface in particular.) Note 9b: When engaging the timing belt, make sure that it securely (S9) engages with the gears of both the center gear assembly and...
  • Page 47 11. 11a Catcher (T) assembly/ 11b Capstan motor 11c Charge arm assembly/ 11d Sub cam gear 11e PWB holder Note 11: The following figure shows how to put the charge arm as- sembly and sub cam gear assembly together. (S11) (S11) Note 11 (W11)
  • Page 48: List Of Procedures For Disassembly

    2.4.3 List of procedures for disassembly Cassette housing assembly (P5) (L1b) (S9) (W5a) (S9) (W5b) (W5a) (W3b) (S1) (W5a) (W10b) (L1d) (L1a) (S4) (S4) (S4) (S1) (L1c) (S1) (S11) (W10a) (S10) (S11) (S10) (W10a) (S11) (S9) (S11) (W9) (W4) (P4b) (P4a) (S9) (W7)
  • Page 49: Checkup And Adjustment Of Mechanism Phase

    2.5 CHECKUP AND ADJUSTMENT OF MECHANISM PHASE <Connect gear> (Note 2) Set the connect gear so <Rotary encoder> that its locating hole meets Set the “I” of the rotary the hole on the main deck part at the tapped hole assembly.
  • Page 50: Mechanism Adjustments

    2.6 MECHANISM ADJUSTMENTS 2.6.1 Assembling slide deck assembly and main deck assembly œ Œ Fig. 2-6-1 Assembling procedure 1. Loosen the screw A. 2. Set the mechanism in the PLAY mode. (Refer to “2.3.2 Explanation of mechanism mode”.) 3. Press the end face B of the slide deck assembly (reel disk side) and the end face C of the main deck assem- bly (drum assembly side) with uniform force so that the two assemblies are tightly pressed to each other.
  • Page 51: Locating Tension Pole

    2.6.2 Locating tension pole <PLAY mode> Fig. 2-6-2 Locating procedure 1. Enter the mechanism assembly into the PLAY mode. (Refer to “2.3.2 Explanation of mechanism mode”.) 2. When the “ ” part is positioned down, make sure that the part “a” of the tension arm assembly is located within the range of “b”.
  • Page 52: Service Note

    2.7 SERVICE NOTE Use the following chart to manage mechanism parts that are removed for disassembling the mechanism. Cassette housing assembly S1×3 Reel disk (SUP) assembly Reel cover assembly W2×1 Reel disk (TU) assembly S2a×2 S2b×1 W2×1 W2×1 Guide arm Tension arm Pinch roller arm Release guide...
  • Page 53 Slide deck assembly Loading Slide guide Guide pin Pad arm brake plate assembly assembly assembly W7×1 P7a×1 S7a×1 W7×1 P7b×1 S7b×1 Control Collar Collar Sub brake plate assembly assembly W7×1 P7c×1 W7×2 P7d×1 W6×1 Main deck assembly Slide lever Tension lever Brake control assembly assembly...
  • Page 54: Jig Connector Cable Connection

    2.8 JIG CONNECTOR CABLE CONNECTION Remove one screw (1) first and the cover (JIG) next. GUIDE ROLLER (SUP) ASSY CN105 SHEET GUIDE ROLLER (TU) ASSY COVER (JIG) EXTENSION CONNECTOR NOTE) For supplying the power through the coupler by removing the cover (for jig), use this extension connector double for connecting the jig connector cable.
  • Page 55: Electrical Adjustment

    SECTION 3 ELECTRICAL ADJUSTMENT 3.1 PRECAUTION 3. Tools required for adjustments 1. Precaution Torque Driver Both the camera and deck sections of this model needs a YTU94088 YTU94088-003 personal computer for adjustment except simple adjustment with potentiometers. If some of the following parts is replaced for repair or other reason, the repaired set must be adjusted with a personal computer.
  • Page 56: Setup

    Torque driver PC cable Be sure to use to fastening the mechanism and exte- To be used to connect the VideoMovie and a personal rior parts because those parts must strictly be control- computer with each other when a personal computer led for tightening torque.
  • Page 57 PACKING CASE,B LY32032-007A PACKING CASE,C,E LY32032-008A PACKING CASE,A LY20588-001A CUSHION LY30023-003A POLY BAG QPA02003006 POLY BAG,A,C,E YQM30061-3 POLY BAG,B,D MODEL MARK LYT0757-001A INST.BOOK(EN),B,D GR-DVX44EG LYT0757-002A INST.BOOK(GE),A,C,E GR-DVX44EK LYT0757-003A INST.BOOK(FR),A,C,E LYT0757-004A INST.BOOK(DU),A,C,E GR-DVX77EG LYT0757-005A INST.BOOK(SP),A,C,E GR-DVX77EK LYT0757-006A INST.BOOK(IT),A,C,E LYT0757-007A INST.BOOK(DA),A,C,E GR-DVX88EG LYT0757-008A INST.BOOK(FI),A,C,E...
  • Page 58 FINAL ASSEMBLY <M2> ELECTRONIC VIEWFINDER <M4> MECHANISM <M3> 154K 154M <02> 154N 154J MAIN 154L <01> 154H AUDIO <08> 154P JUNCTION 154B <06> 154C 154E 154C 154D 210A 154F RATING LABEL 220G 154A 220G 220G 154G <11> 220F 220C 251C OPTICAL BLOCK 251D 251G...
  • Page 59 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 60 MECHANISM ASSEMBLY <M3> NOTE:The section marked in AA and BB indicate Classification Part No. Symbol in drawing lubrication and greasing areas. Grease KYODO-SH-P YTU94027...
  • Page 61 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 62 ELECTRONIC VIEWFINDER ASSEMBLY <M4> 305B 305A 305B REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 63 MONITOR ASSEMBLY <M5> 504E 504C 504C 504B 504D 504A MONITOR <04> REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 64: Main Board Assembly <01

    ELECTRICAL PARTS LIST REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 65 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 66 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 67 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 68 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 69 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 70 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 71 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 72 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 73: Mda Board Assembly <02

    REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 74: Ccd Board Assembly <03

    REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 75: Junction Board Assembly <06

    REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 76: Audio Board Assembly <08

    REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 77 REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 78: Jack Board Assembly <09

    REF No. PART No. PART NAME, DESCRIPTION REF No. PART No. PART NAME, DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -...
  • Page 79 SECTION 4 CHARTS AND DIAGRAMS NOTES OF SCHEMATIC DIAGRAM 4. Voltage measurement CIRCUIT BOARD NOTES 1) Regulator (DC/DC CONV) circuits 1. Foil and Component sides Safety precautions REC : Colour bar signal. 1) Foil side (B side) : The Components identified by the symbol : Alignment tape (Colour bar).
  • Page 80 BOARD INTERCONNECTIONS [GR-DVX44EG/EK] NOTE ) : The number of patch cords are indicated by interconnected. OPEN DECK OPE ASSY LCD MODULE (Page 4-69) JUNCTION (Page 4-48) (Page 4-57) (Page 4-65) V OUT TG/V.DRV YTU94074-24 YTU94074-20 YTU94077-24 YTU94077-20 (Page 4-33) A/HP SEL.
  • Page 81 BOARD INTERCONNECTIONS [GR-DVX77EG/EK , DVX88EG] NOTE ) : The number of patch cords are indicated by interconnected. DECK OPE ASSY LCD MODULE (Page 4-69) (VIDEO/DSC SW) JUNCTION (Page 4-48) (Page 4-57) (Page 4-65) V OUT YTU94074-24 TG/V.DRV YTU94074-20 YTU94077-24 YTU94077-20 (Page 4-33) A/HP SEL.
  • Page 82 SYSCON SCHEMATIC DIAGRAM [GR-DVX44EG/EK] NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List.
  • Page 83 SYSCON SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN ( SYSCON ) TO REG SERVO...
  • Page 84 PC IF SCHEMATIC DIAGRAM [GR-DVX44EG/EK] NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List.
  • Page 85 PC IF SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN ( PC IF ) C1301 TO SYSCON...
  • Page 86 NOTES : For the destination of each signal and further line connections that are cut off from DVMAIN SCHEMATIC DIAGRAM [GR-DVX44EG/EK] this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List.
  • Page 87 DVMAIN SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN ( DVMAIN ) USED TO CAM DSP...
  • Page 88 TO REG y10199001a rev0 MODEL MODEL IC1402 R1417 R1443 R1435 R1443 R1444 R1402 MODEL ROMTYPE IC1401 IC1403 R1410 R1411 R1412 IC1401 GR-DVX44EG/EK YQ44887A GR-DVX44EG/EK TC7W66FU NONE NONE FLASH MN1030F04KYBJN TC7W53FU GR-DVX44EG/EK GR-DVX77EG/EK , DVX88EG YQ44888A GR-DVX77EG/EK , DVX88EG NONE NONE NONE...
  • Page 89 4.10 PRE/REC SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. SERVO TO VF MAIN TO CAM DSP...
  • Page 90 For the destination of each signal and further line connections that are cut off from 4.11 V OUT SCHEMATIC DIAGRAM [GR-DVX44EG/EK] this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List.
  • Page 91 V OUT SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] NOTES : For the destination of each signal and further line connections that are cut off from 4.12 this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. TO REG ( NC ) TO VF MAIN...
  • Page 92 4.13 CAM DSP SCHEMATIC DIAGRAM [GR-DVX44EG/EK] NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List.
  • Page 93 CAM DSP SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] 4.14 MAIN ( CAM DSP ) TO TG/V.DRV TO VF MAIN TO SYSCON, VF MAIN TO DVMAIN TO SYSCON, DVMAIN TO DVMAIN TO CCD TO VF MAIN (NC) TO PRE/REC TO DVMAIN TO PRE/REC TO STO SENS TO VF MAIN TO SYSCON...
  • Page 94 4.15 ANA IN SCHEMATIC DIAGRAM [THIS SCHEMATIC DIAGRAM IS NOT USED] NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. OPEN ( ANA IN ) TO CAM DSP...
  • Page 95 4.16 TG/V.DRV SCHEMAITC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN ( TG/V.DRV ) TO CCD TO CAM DSP...
  • Page 96 STO SENS, VF MAIN, MP3, USB DRV TO SYSCON TO SYSCON TO SERVO TO VF MAIN TO TG/V.DRV TO VF MAIN TO SYSCON TO SYSCON TO SERVO NSW0018-001X TO VF MAIN y10202001a rev0 NO WEAR L6204 GR-DVX44EG/EK NSW0018-001X GR-DVX77EG/EK, DVX88EG 4-35 4-36...
  • Page 97 STO SENS SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] 4.18 NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN ( STO SENS ) TO STROBE CN6501...
  • Page 98 TO PRE/REC TO DVMAIN TO SERVO TO SYSCON TO SYSCON TO SERVO TO SERVO CAM DSP TO REG SYSCON PC IF CN106 SERVO TO SYSCON y20140001a rev0 EXCHANGE PARTS LIST GR-DVX44EG/EK GR-DVX77EG/EK, DVX88EG TO IR TALLY CN206 NO WEAR 4-39 4-40...
  • Page 99 DSC SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] 4.20 NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN ( DSC ) TO REG TO DSC...
  • Page 100 4.21 MP3 SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. TO VF MAIN TO VF MAIN TO DSC...
  • Page 101 USB DRV SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] 4.22 NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN ( USB DRV ) TO DSC TO REG...
  • Page 102 When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MAIN ( W/B ) TO VF MAIN TO TG/V.DRV CN107 TO REG TO SYSCON TO CAM DSP CN107 TO TG/V.DRV CN107 y40073001a rev0 y40072001a rev0 GR-DVX44EG/EK GR-DVX77EG/EK , DVX88EG NO WEAR 4-47 4-48...
  • Page 103 4.25 MDA SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MDA ( MDA ) TO IR TALLY IR TALLY...
  • Page 104 TO MDA RS-171-X TO CN206 MDA ( IR TALLY ) LOADING MOTOR TO MDA CN207 TO CN206 EXCHANGE PARTS LIST SUB OPE. UNIT GR-DVX44EG/EK GR-DVX77EG/EK, DVX88EG DRUM MOTOR ONLY USED FOR DVX77EG/EK DVX88EG TO CN206 CAPSTAN MOTOR TO JUNCTION CN601...
  • Page 105 TO IR TALLY y30132001a rev0 NO WEAR EXCHANGE PARTS LIST R4837 , R4839 , R4840 R4841 , R4842 R4846 , R4849 IC4807 Q4802 Q4803 Q4804 Q4805 R4825 R4826 GR-DVX44EG/EK GR-DVX77EG/EK , DVX88EG TC7W66FU 2SC4617/RS/-X DTC144EE DTA144EE DTA143EE 2.2k 4-53 4-54...
  • Page 106 4.28 MONITOR SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. MONITOR LCD MODULE TO VF MAIN...
  • Page 107 When ordering parts , be sure to order according to the Part Number indicated in the Parts List. TO SPEAKER TO CARD CN766 TO IR TALLY CN208 CAMERA OPE. UNIT y30133001a rev0 NO WEAR GR-DVX44EG/EK GR-DVX77EG/EK , DVX88EG 4-57 4-58...
  • Page 108 STROBE SCHEMATIC DIAGRAM [GR-DVX77EG/EK , DVX88EG] 4.30 NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. NQS0042-001X STO SENS CN109...
  • Page 109 ( AUDIO AD/DA ) MAIN AUDIO TO VF MAIN CN101 CN801 TO VF MAIN CN101 CN801 TO MAIN AUDIO TO VF MAIN CN101 CN801 y30134001a rev0 NO WEAR EXCHANGE PARTS LIST GR-DVX44EG/EK GR-DVX77EG/EK, DVX88EG GR-DVX44EG/EK GR-DVX77EG/EK, DVX88EG R2158 3.3k 4-61 4-62...
  • Page 110 HCK1 R2001 DECK OPE ASSY CN803 R2002 1.5k VF VDD KEY PLAY R2003 1.8k KEY STOP GR-DVX44EG/EK S8 with ANA. IN GR-DVX77EG/EK, DVX88EG GR-DVX44EG/EK S8 with ANA. IN GR-DVX77EG/EK, DVX88EG KEY FF R2004 CVF B KEW REW 2.7k CVF R...
  • Page 111 TO VF MAIN CN101 CN801 MAIN AUDIO TO VF MAIN CN101 CN801 REG-6.5V REG-6.5V TO VF MAIN CN101 CN801 MAIN AUDIO NO WEAR y30135001a rev0 EXCHANGE PARTS LIST GR-DVX44EG/EK GR-DVX77EG/EK , DVX88EG GR-DVX44EG/EK GR-DVX77EG/EK , DVX88EG GR-DVX44EG/EK GR-DVX77EG/EK , DVX88EG 4-65 4-66...
  • Page 112 4.34 JACK SCHEMATIC DIAGRAM NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". When ordering parts , be sure to order according to the Part Number indicated in the Parts List. TO VF MAIN CN103 J901...
  • Page 113 4.35 WB SENS , CAMERA OPE. UNIT , DECK OPE. ASSY AND SUB OPE. UNIT SCHEMATIC DIAGRAMS NOTES : For the destination of each signal and further line connections that are cut off from this diagram , refer to "4.1 BOARD INTERCONNECTIONS". The schematic diagram is only for reference.
  • Page 114 4.36 MAIN CIRCUIT BOARD [GR-DVX44EG/EK] FOIL SIDE ( B ) MAIN PWB YB10318-01-02 4-71 4-72...
  • Page 115 COMPONENT PARTS LOCATION GUIDE MAIN [GR-DVX44EG/EK] REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION C3033 C4314 C6204 IC3501 Q6210 R1307 CAPACITOR C3034 C4315 C6205 IC3701 Q6211 R1308 C1001 C3035 C4316 C6206 IC4201 Q6212 R1401...
  • Page 116 REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION R3509 R6002 RA1010 R3510 R6003 RA1401 R3521 R6004 RA1402 R3522 R6005 RA1403 R3701 R6008 RA3001 R3702 R6009 RA4301 R3703 R6010 RA4302 R3706 R6011 RA4303 R3707 R6012 TESTPOINT R3708 R6013 R3712 R6014 R3713 R6015 R3714 R6016 OTHER R3715...
  • Page 117 COMPONENT SIDE ( A ) CN110 MAIN PWB YB10318-01-02 CN102 CN104 CN103 CN107 4-75 4-76...
  • Page 118 4.37 MAIN CIRCUIT BOARD [GR-DVX77EG/EK , DVX88EG] FOIL SIDE ( B ) MAIN PWB YB10319-01-02 4-77 4-78...
  • Page 119 [GR-DVX77EG/EK , DVX88EG] COMPONENT PARTS LOCATION GUIDE MAIN REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION C3036 C3957 C5518 C8011 CN112 L3001 CAPACITOR C3037 C3958 C5519 C8012 L3002 DIODE C1001 C3038 C3959 C6001 C8013 L3003 C1002 D1001...
  • Page 120 REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION Q6001 R1071 R3049 R4322 R6220 R8042 RA8401 Q6002 R1072 R3050 R4323 R6221 R8043 RA8402 Q6003 R1073 R3052 R4324 R6223 R8044 RA8403 Q6004 R1074 R3053 R4325 R6224 R8045 RA8404 Q6201...
  • Page 121 COMPONENT SIDE ( A ) MAIN PWB YB10319-01-02 4-81 4-82...
  • Page 122 4.38 MDA CIRCUIT BOARD COMPONENT SIDE ( A ) FOIL SIDE ( B ) MDA PWB MDA PWB YB10320-01-01 YB10320-01-01 CN204 COMPONENT PARTS LOCATION GUIDE REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION C4814 R1628 R4840 TL1619 CAPACITOR COIL...
  • Page 123 4.39 CCD AND JUNCTION CIRCUIT BOARDS JUNCTION FOIL SIDE ( B ) JUNCTION PWB FOIL SIDE ( B ) YB10323-01-01 CCD PWB YB10322-01-01 JUNCTION PWB COMPONENT SIDE ( A ) COMPONENT SIDE ( A ) YB10323-01-01 CCD PWB YB10322-01-01 CN602 CN601 CN603 4-85...
  • Page 124 4.40 MONITOR CIRCUIT BOARD MONITOR PWB MONITOR PWB YB10321-01-01 YB10321-01-01 FOIL SIDE ( B ) COMPONENT SIDE ( A ) CAUTION HIGH VOLTAGE CN761 F7501 COMPONENT PARTS LOCATION GUIDE MONITOR REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION CAPACITOR C7603 C7616...
  • Page 125 4.41 AUDIO CIRCUIT BOARD COMPONENT SIDE ( A ) FOIL SIDE ( B ) CN804 AUDIO PWB AUDIO PWB YB10320-01-01 YB10320-01-01 COMPONENT PARTS LOCATION GUIDE AUDIO REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION REF.NO. LOCATION CAPACITOR C2210 C2605...
  • Page 126 STROBE , W/B AND JACK CIRCUIT BOARDS 4.42 [GR-DVX77EG/EK , DVX88EG] STROBE JACK FOIL SIDE ( B ) COMPONENT SIDE ( A ) STROBE PWB STROBE PWB FOIL SIDE ( B ) YB10249-01-01 YB10249-01-01 JACK PWB YB10323-01-01 COMPONENT SIDE ( A ) FOIL SIDE ( B ) COMPONENT SIDE ( A ) JACK PWB...
  • Page 127 4.43 VOLTAGE CHARTS <SYSCON> <SERVO> <PRE/REC> <V OUT> <REG> MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO.
  • Page 128 <OP DRIVER> <MAIN AUDIO> MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PLAY PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO.
  • Page 129 4.44 POWER SYSTEM BLOCK DIAGRAM TG/V.DRV MAIN V OUT OP BLOCK CN107 CN5201 CN5202 REG 4.8V Q3701 CCD 12V CCD-6.5V CCD-6.5V Q3702 REG-6.5V IC5501 REG 3V CCD 12V CCD 12V CCD 12V CCD 12V BATT. TERMINAL F6101 M UNREG Q5001 V DC DRUM PWR CAP PWR...
  • Page 130 4.45 VIDEO SYSTEM BLOCK DIAGRAM FOR ANALOG INPUT MODEL EXT V IN IC3901 MAIN VYIN EXT Y IN IC3951 (ANA IN) C OUT YIN(0 7) IC4302 DAC Y/DAC C CIN(0 3) IC4303 YOUT(0 7) DYO(0 (MEMORY) COUT(0 3) DYO(0 TPA +/-, TPB +/- J101 DV JACK IC4201...

Table of Contents