Operating; Operating Instructions - Porsche Mobile Charger Connect Owner's Manual

Operating

Fig. 13: Overview of the web application
A Current charging session
Shows information on the current charging ses-
sion, such as the start time and the duration of the
charging session.
B Device status
Displays information on the device, for example:
–
the current charge status
–
the network connection used
–
the connection status to the energy manager
(if present)
–
the availability of a software update
–
the deactivation of ground monitoring
C Current charging capacity
The current flow of electrical power [in kilowatt]
from the charger to the load.
Curve progression: The curve shown depicts the
temporal progress of the charging power from the
start of charging as well as the total energy con-
sumption [in kilowatt].
In the curve, select a time in order to view the
charging power at this point in time.
1. Time of printing: Further information is available from your authorized Porsche dealer.
18
D Consumption
The total energy consumption for the current
charging session [in kilowatt hours].
E Charge status
The color used in the overview indicates the
charge status of the device:
– Red: Error message
– Blue: Charging paused
– Green: Vehicle is charging
– White: No vehicle is connected to the charger
Operating

Operating instructions

In some countries, the relevant authorities must be
notified when you connect electric vehicle charging
equipment.
e
Check obligation to notify the authorities and le-
gal requirements for operation before connecting
charging equipment.
NOTE
Damage to the charger
e
Always place the charger on a solid surface when
charging.
e
Porsche recommends that you use the charger
in the basic wall mount or in the charging dock.
In some countries, e.g. Switzerland
may only be used in the basic wall mount or in
the charging dock.
e
Do not immerse the charger in water.
e
Protect the charger from snow and ice.
e
Handle the charger with care and protect it from
potential damage from being driven over, drop-
ped, pulled, bent or crushed.
e
Do not open the charger housing.
NOTE
Damage to the charger
The charger must only be operated within a tem-
perature range from -22 °F to +122 °F (-30 °C to
+50 °C).
e
To prevent overheating during operation, avoid
continuous exposure of the charger to direct
sunlight. If the charger overheats, charging will
be interrupted automatically until the tempera-
ture has returned to the normal range.
e
If the charger is too hot or too cold, let it return
slowly to the operating temperature range and
do not actively cool it down or heat it, e.g. by
cooling it down with cold water or heating it with
a hairdryer.
, the charger
1