Turning The Power On And Off - Panasonic PT-LC50U Operating Instructions Manual

Turning the power on and off
POWER Button POWER Indicator
STANDBY(RED)
POWER Button
ON(GREEN)
(Supplied)
Turning on the power
1 Press POWER Button on the LCD Projector or remote contro! unit.
2 The power indicator will flash, then turn solid green and a picture will be
projected onto the screen.
Turning off the power
1 Press POWER Button on the LCD Projector or remote control unit. "Please
press POWER button again to power off." is displayed on the screen, and then
press POWER button again.
2 The power indicator will illuminate flashing red.
3 Wait for the cooling fan to stop.
The power indicator changes to solid red, the cooling fan stops, and the
projector goes into Stand-by mode. (After about 1 minute)
* The LCD Projector cannot be turned on for 60 seconds after turning it off.
* Insert Power Cord into LCD Projector AC socket and connect to properly
grounded wall outlet.
* When power is turned off, the cooling fan continues to operate
(approximately 60 seconds) in order to cool the projector interior.
e This unit consumes approx. 15 W in OFF condition when plugged into an AC
outlet.