Control Unit; Turning On The Power - Panasonic PT-AE500U Operating Instructions Manual

Turning on the power
-Before turning on the power --
1, Ensure that all components
are connected properly.
2, Connectthe accessory powercord.
3, Remove the lens cover.
power cord
i i
Lens cover
Power indicator
(_Press the MAIN POWER switch to turn on the
power.
• The power indicator on the projector will illuminate red.
(_Press the POWER button.
• The power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
(_Turn on the of all connected devices.
power
• Start the play function of a device such as a DVD player.
(_ Press the input select button to select the
input signal.
Control
panel
Remote
control
unit
Changing
signals
Changing
signals
[VIDEO ]_S-VlDEO _IY'PB'PR]
[' DVI PC
EY-PB'PRI
• A picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
®
Adjusting the angle
• While pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector. Adjust so that the
projector is as vertical to the screen
as possible.
\
(_ Adjusting the size
• Turn the zoom ring to adjust
the size of the projected image.
(_ Adjusting the focus
• Turn the focus ring to adjust
the focus of the projected image.
Zoom
[_(3CUS -*
22-ENGLISH ENGLISH-23