Table of Contents
Advertisement
Turning on the power
Before turning on the power
1, Ensure that all components
are connected properly.
2, Connect the accessory power cord.
3, Remove the lens cover.
$
˛
POWER
LIGHT
&
˛
INPUT
COMPONENT
KEYSTONE
MENU
ENTER
NORMAL
FREEZE
'
˛
MODE
MEMORY
ASPECT
PICTURE
USER
Lens cover
#
Press the MAIN POWER switch to turn on the
power.
BThe power indicator on the projector will illuminate red.
$
Press the POWER button.
BThe power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
%
Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
B A tinkling sound may be heard when the lamp unit is turned on, but
this is not a sign of a malfunction.
22-E
NGLISH
#
˛
power cord
(
˛
)
˛
'
˛
Power indicator
Press the input select button to select the
&
input signal.
Input select
button
Control
panel
Changing
signals
Input select
button
Remote
control
Changing
unit
signals
BA picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
'
Adjusting the angle
BWhile pressing the adjuster buttons,
adjust the forward/back angle of tilt
of the projector. Adjust so that the
projector is as vertical to the screen
as possible.
Adjusting the size
(
BTurn the zoom ring to adjust
the size of the projected image.
Adjusting the focus
)
BTurn the focus ring to adjust
the focus of the projected image.
Y · PB · PR
VIDEO
S-VIDEO
DVI
PC
VIDEO
PC
Y · PB · PR
S-VIDEO
DVI
Zoom
Focus
E
NGLISH
-23
Advertisement
Table of Contents
