To Erase The Program Memory; To Erase A Program; Convenient Program Operations; To Change The Contents Of Programmed Tracks Already Input - Pioneer PD-7500 Operating Instructions Manual

TO SELECT PLAYBACK OF TRACKS IN A SPECIFIC ORDER
L To erase the program memory
@:
Tl [r] ee
Tie Ge We
ae
©: 2
2)
(2)
To erase a program |
LJ) =»
A BAL A
The programmed tracks will be erased, beginning with the last
programmed, in accordance with the number of times CLEAR
button (@) is pressed.
NOTE:
Convenient program operations
To activate a preserved program, press PGM button @.
Then, to recommence playback of a program you have activat-
ed, press PLAY button @.
14
<PRB1127>
En
CHECK
CHECK
eee
CHECK
With the unit in the stop mode, press PGM but-
ton @.
® The player will enter the program input mode.
Press CHECK button (8).
e@ Each time the button is pressed, the programmed tracks
will be displayed in the order they were programmed.
After confirming the last track programmed, the
track number display will show ''00°'.
4. When CHECK button (8) is pressed again, the dis-
play will return to the shown in step 1.
already input
To change the contents of programmed tracks |
With the unit in the stop mode, press PGM but-
ton @.
®@ The player will enter the program input mode.
Press CHECK button 6).
® Continue pressing CHECK button @) until the track num-
ber to be changed is displayed.
Use the number buttons to input the new track
number desired.
® Repeat steps 2 and 3 to change other tracks as desired.
®@ Use the program check operation to advance to the track
number to be changed, then use the number buttons to in-
put the new programmed track.