▶ Super IO Configuration
▶ Serial Port 1/ 2/ 3/ 4/ 5/ 6, Parallel Port
This setting enables or disables the specified serial port.
» Change Settings
This setting is used to change the address & IRQ settings of the specified serial port.
» Mode Select
Select an operation mode for Serial Port 1/ 2/ 3/ 4/ 5/ 6, Parallel Port.
▶ FIFO Mode
This setting controls the FIFO (First In First Out) data transfer mode.
▶ Shared IRQ Mode
This setting provides the system with the ability to share interrupts among its
serial ports.
▶ Watch Dog Timer
You can enable the system watchdog timer, a hardware timer that generates a
reset when the software that it monitors does not respond as expected each time
the watchdog polls it.
46
Advanced