Table of Contents
Advertisement
•
At operating temperatures = 60 °C a
long contact (approx. 3s) of the skin
with the surface of the machine/valve
may cause burns (DIN EN ISO 13732-
1).
•
At
operating
55 °C – 60 °C a long contact (approx.
3S to 10s) of the skin with the sur-
face of the machine/valve may cause
burns (DIN EN ISO 13732-1)..
CAUTION
Self-loosing components!
Components and fasteners may become
loose if not properly installed.
•
Observe the information on tightening
torques in this operating manual.
•
Check the tightening torque of screw
connections and tighten with the
torque wrench, if necessary.
CAUTION
Noise!
(only for pneumatic actuator)
When venting the pneumatic rotary actua-
tor, noise can be hazardous to health.
•
Use silencer at vent port or take other
personal protection measures.
PZDS/EZDS-IM-DE-B-EN-01-23 Rev.0
temperatures
15
Advertisement
Table of Contents
