Summary of Contents for Chauvet Professional Ovation E-910FC
Page 1
User Manual *LENS TUBE SOLD SEPARATELY Model ID: OVATIONE910FC...
Page 2
Ovation E-910FC. Trademarks Chauvet, Chauvet Professional, the Chauvet logo, and Ovation are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
Focus Mode ........................Virtual Color Wheel ......................Color Temperature ......................Manual Color Mixer ......................Auto Programs ....................... Red Shift ........................Master/Slave ........................Dimmer Curve ........................ Dimmer Profiles......................White Balance ........................ LED Frequency ......................Fan Mode ........................Ovation E-910FC User Manual Rev. 15...
Page 4
Virtual Color Wheel ..................19 Virtual Color Wheel Chart ....................Color Temperature DMX Chart ..................DMX Values ....................21 5. Technical Information ..............Product Maintenance ..................23 6. Technical Specifications ............Contact Us ..................Warranty & Returns..................25 Ovation E-910FC User Manual Rev. 15...
Important installation or configuration information. The product may not function correctly if this information is not used. Useful information. The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol. Ovation E-910FC User Manual Rev. 15...
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it. • In the event of a serious operating problem, stop using immediately. If a Chauvet product requires service, contact Chauvet Technical Support. Ovation E-910FC User Manual Rev. 15...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Ovation E-910FC User Manual Rev. 15...
2. Introduction Description The Ovation E-910FC is a high-performance ERS-style fixture with full RGBAL color mixing and color temperature presets of 2800 K to 6500 K that match the output of a tungsten source to perfection. Control options include full 16-bit dimming (per color and master), selectable PWM, RDM, and on-board dimming curve selection.
Framing shutter (x4) Control panel Handle Menu buttons 3- and 5-pin Power in DMX in Lens tube Fuse Light engine (sold separately) 3- and 5-pin Power out DMX out Barrel assembly Gel frame holder Ovation E-910FC User Manual Rev. 15...
Introduction Product Dimensions 25.910 in 283 mm 11.17 in 6.86 in 283 mm 174 mm 19.35 in 491 mm 19.15 in 486 mm 6.77 in 172 mm Ovation E-910FC User Manual Rev. 15...
AC Ground Green/Yellow Green/Yellow Green Power Linking It is possible to power link Ovation E-910FC products. See the table below for the current draw at each voltage and frequency: 100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz...
Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs. Procedure The Ovation E-910FC comes with a double-bracketed yoke that can be used as a floor stand or to which mounting clamps can be attached for hanging. Mounting clamps must be purchased separately. Ensure that the clamps can support the weight of this product.
Page 13
Setup Mounting Diagram Mounting clamp Mounting bracket Safety cable Bracket adjustment hand shank Alternate Short Mounting Ovation E-910FC User Manual Rev. 15...
Accessory Slot The Ovation E-910FC has an accessory slot, which holds a drop-in iris, a motorized pattern device, or various other optional accessories (sold separately). Loosen the thumbscrews on the slot cover. (Note: Do not remove the thumbscrews).
Setup Soft Focus Filter The Ovation E-910FC comes with a soft focus filter. To keep the soft focus filter in good condition: • Ensure that no fingerprints are left on the filter, as this may cause the filter to heat unevenly and eventually warp.
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function Control Options Set the Ovation E-910FC starting address in the 001-512 DMX range. This enables control of up to 12 products in the 16-channel personality.
Operation Menu Map Refer for the Ovation E-910FC product page on www.chauvetprofessional.com for the latest menu map. Main Level Programming Levels Description Selects DMX address (*highest channel 001–512* Address restricted to personality chosen) 1-channel: dimmer 3-channel: dimmer, virtual color wheel,...
Page 18
C5050 - Md Blue C5060 - Dk Blue C5690 - Indigo C5080 - VDk Blue C5081 - VDk Blue 2 C4370 - Yel Green C4070 - Green C4550 - Turquoise C4560 - Aqua C4570 - Blue Green Ovation E-910FC User Manual Rev. 15...
Page 19
Sets green LED maximum value White Balance Manual Blue 125–255 Sets blue LED maximum value Amber Sets amber LED maximum value Lime Sets lime LED maximum value 600Hz 1200Hz 2000Hz Sets the PWM frequency Frequency 4000Hz 6000Hz 25KHz Ovation E-910FC User Manual Rev. 15...
Use standalone configuration to operate the product without a DMX controller. Focus Mode Focus mode allows for focusing of the Ovation E-910FC without changing any menu settings. Press and hold <ENTER> for 3 seconds. The intensity will increase to 100%.
Operation Master/Slave The Master/Slave mode allows a group of Ovation E-910FC products (the slaves) to simultaneously duplicate the output of another Ovation E-910FC (the master) without a DMX controller. To set each of the slaves: Go to the Master/Slave main level Select Slave.
Keep a safe distance from flammable objects. Back Light This setting allows for selection of the amount of time the backlight on the Ovation E-910FC’s display stays on after the last button is pressed on the control panel. Go to the Back Light main level.
Operation Virtual Color Wheel The Ovation E-910FC includes a feature called the Virtual Color Wheel (VCW). This feature is available as a standalone control mode for manual use and as a control channel in select DMX personalities. More than 30 premixed colors, custom blended by Chauvet engineers, are available to call up for easier programming.
No function Note: The color temperatures above are simulated renditions of the color output produced compared with a tungsten lamp at the specified color temperature. Chauvet makes no guarantee of the color output accuracy. Ovation E-910FC User Manual Rev. 15...
103 X-Fade Speed: OFF 111 X-Fade Speed: 1 (fastest) 119 X-Fade Speed: 2 127 X-Fade Speed: 3 135 X-Fade Speed: 4 (slowest) 255 Reserved for future use Ovation E-910FC User Manual Rev. 15...
Page 26
– Virtual Color Wheel specific values 255 Refer to the Color Temperature section for – Color Temperature specific values Channel Function Value Percent/Setting 0–100% Saturation 0–100% Value 0–100% Ovation E-910FC User Manual Rev. 15...
Softly drag any dirt or grime to the outside of the transparent surface. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Ovation E-910FC User Manual Rev. 15...
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration. Ovation E-910FC User Manual Rev. 15...
Need help?
Do you have a question about the Ovation E-910FC and is the answer not in the manual?
Questions and answers