Table of Contents
Advertisement
RECEPTION BY PRESET NUMBER
MONO i
ne a
gaooa
2
masini
>
Poo]
oD ®
|
1
pial!
°
_o Q
MULTI
a0
JOG
Fr.
aa
x @
ao
1 Press TUNER
BAND to select a band.
2 Press <b
PRESET
repeatedly or turn MULTI
JOG.
Each time the button is pressed, the next highest number is
selected.
Selecting a preset number on the remote control
Press BAND while pressing SHIFT to select a band. Then, press
the numbered buttons to select a preset number.
Example:
To select preset number 20, press +10, +10 and 0.
To select preset number 15, press +10 and 5.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
@ CLEAR, and press Il SET within 4 seconds.
The preset numbers of all stations in the band with higher
numbers are also decreased by one.
To tune in to a station which is not preset
Press TUNER BAND to select a band, and press << DOWN or
>» UP to select the station.
To play a tuned station when the power is off (Direct Play
Function)
Press TUNER
BAND. The power is turned on and the tuned
station is played.
When an FM stereo broadcast contains noise
Press MONO TUNER while pressing SHIFT on the remote control
to display MONO.
MONO
eee
Noise is reduced, although reception is monaural.
To restore stereo reception, repeat the above so that the MONO
indicator goes out.
[NOTE
RDS functions may not work correctly if the RDS transmission
data from the station contains too much interference or the
reception signal is too weak.
To display radio text ("*RT) during RDS reception
When the tuned station is transmitting RT codes, text appears
on the display when RT is pressed.
.
If the tuned station is not transmitting RT codes, "NO RT" is
displayed when RT is pressed.
Radio text
To return to the normal display, press RT again.
"RDS
Today many stations transmit so-called RDS (Radio Data
System) codes that contain a variety of additional
information along with regular sound signals.
"Identical
RDS
stations
with
alternative
©
: frequencies (AF)
ot
- This is a list of alternative frequencies that gives
©.
. information on the various transmitters broadcasting the
- game program in the same reception area. It enables
_
- receivers equipped with memory
to store the list, to reduce
the time needed for switching to another transmitter.
*Program service station name (PS)
This is
aname consisting of not more than 8 alphanumeric
characters, which is displayed in order to inform listeners
about the program service being broadcast by the radio
station.
Example: BBC 1
= Characters which can be displayed
-
IABCDEFGHIJKLMNOPQRSTUVWXYZ
10123456789
<>?"'* @-+/=[]
lf a character transmitted by the broadcast
is not
' applicable to receivers, a blank space is inserted.
a *4Radiotext (RT)
«Information such as the cast list of a play or the title ofa |
"= gong is shown on the display.
Advertisement
Table of Contents
