Why Yamalube - Yamaha MT-10SP Owner's Manual

Periodic maintenance and adjustment
9. Install the engine oil drain bolt and
1
its new gasket, and then tighten
the bolt to the specified torque.
2
Tightening torque:
Engine oil drain bolt:
3
23 N·m (2.3 kgf·m, 17 lb·ft)
4
10. Refill with the specified amount of
the recommended engine oil.
5
TIP
Wipe off any spilled oil before starting
6
the engine.
11. Check the O-ring for damage, and
7
then install the oil filler cap.
8
9
10
11
12
1. Engine oil filler cap
2. O-ring
13
12. Start the engine and let it idle for
several minutes while checking for
oil leakage. If any leakage is
found, immediately stop the en-
gine and check for the cause.
TIP
After the engine is started, the oil pres-
sure warning light should go off if the oil
level is sufficient.
NOTICE
If the oil pressure warning light flick-
ers or remains on even if the oil level
is correct, immediately turn the en-
gine off and have a Yamaha dealer
check the vehicle.
13. Turn the engine off, wait a few min-
utes until the oil settles, and then
1
check the oil level one last time.
2

Why Yamalube

YAMALUBE oil is a Genuine YAMAHA
Part born of the engineers' passion and
belief that engine oil is an important liq-
uid engine component. We form teams
of specialists in the fields of mechanical
engineering, chemistry, electronics and
track testing, and have them develop
the engine together with the oil it will
ECA20860
use. Yamalube oils take full advantage
of the base oil's qualities and blend in
the ideal balance of additives to make
sure the final oil clears our performance
standards. Thus, Yamalube mineral,
semisynthetic and synthetic oils have
their own distinct characters and value.
Yamaha's experience gained over
many years of research and develop-
ment into oil since the 1960's helps
make Yamalube the best choice for
your Yamaha engine.
8-13
EAU85450