Yamaha MT-10SP Owner's Manual page 42

Instrument and control functions
page 5-16.)
1
TIP

YRC settings shown on the bottom
2
of the main screen (PWR, TCS,
SCS and ERS) can be adjusted in-
3
dependently from the main screen.

YRC settings shown on the top of
4
the main screen (QS"
LIF, BC" " and EBM) cannot be
5
adjusted independently from the
main screen. To change these val-
6
ues, use the YRC Setting MENU.
(See page 5-16.)
7

The LIF icon only show as active/
inactive but have different setting
8
levels that can be adjusted in the
YRC Setting
page 5-16.)
9

The BC " " and EBM icons show
both active/inactive as well as the
10
current setting level.
11
The YRC modes come preset from the
factory for different riding conditions.
12
When using the factory presets, the
suggested YRC modes are as follows.
MODE-A: suitable for track riding
13
MODE-B: softer track-riding setting
MODE-C: suitable for road use
MODE-D: street use or rainy weather
To change YRC modes or make setting
changes
1. Use the "MODE" switch to scroll
left to right and highlight the item
you want to adjust.
2. Use the MODE up "
", QS" ",
down "
selected item value.
TIP

When the engine trouble warning
light "
warning "
perature warning "
settings cannot be adjusted.

MENU. (See When the SCU trouble warning
"
ed.

When a YRC function is actively
engaged that item cannot be ad-
justed. For example, when accel-
erating PWR cannot be adjusted.

When a YRC item is highlighted
but cannot be adjusted, the YRC
item box will return to black.

If the ERS mode disappears from
the ERS indicator (the icon turns
" or MODE
" switches to change the
", the auxiliary system
", or the coolant tem-
" are on, YRC
" is on, ERS cannot be adjust-
5-14
blank), stop the vehicle and wait a
few seconds until the mode reap-
pears.
-
QS LIF 1 A
EBM MODE - 1
1000 r/min
12 34
12
09
LAP
56 TRIP-1 1234.5
MPH
mile
A 1 3 1
A-1
MODE- PWR TCS SCS
Turning off the traction control system
To turn off the traction control system,
select TCS with the "MODE" switch,
then press and hold the MODE up "
switch until TCS OFF is displayed.
To turn the traction control system back
on, select TCS OFF and then press the
MODE down " " switch (the traction
control system will return to its previous
setting).
TIP
Turning off the traction control system
will turn off the SCS and LIF systems
for all YRC mode presets.
12 : 00
A
MODE -
GEAR
N
OFF
"