Video Sources; Apps - Axis D1110 User Manual

AXIS D1110 Video Decoder 4K
The web interface

Video sources

Camera sources
Add a video source: Click to add a new video source.
• Network discovery: Search for an IP address manually or select an Axis device from the list.
-
-
-
-
-
-
-
• Manual: Add a device manually.
-
-
-
-
The context menu contains:
Edit video source: Edit the properties of the video source.
Delete video source: Delete the video source.
Media sources
Add a media source: Click to add a new media source.
• Upload or drag and drop a media file. You can use .mp4, .mkv, .jpeg or .png files.
• Upload location: Select the location from the drop-down list.

Apps

Add app: Install a new app.
Find more apps: Find more apps to install. You will be taken to an overview page of Axis apps.
Allow unsigned apps: Turn on to allow installation of unsigned apps.
Allow root-privileged apps: Turn on to allow apps with root privileges full access to the device.
Note
The device's performance might be affected if you run several apps at the same time.
Use the switch next to the app name to start or stop the app.
Open: Access the app's settings. The available settings depend on the application. Some applications don't have any settings.
The context menu can contain one or more of the following options:
• Open-source license: View information about open-source licenses used in the app.
Streaming protocol: Select which protocol to use
Port: Enter the port number.
554 is the default value for RTSPT
80 is the default value for RTSP over HTTP
443 is the default value for RTSP over HTTPS
Username: Enter the username for the device.
Password: Enter the password for the device.
Name: Enter the video source's name.
IP address: Enter the device's IP address.
Username: Enter the username for the device.
Password: Enter the password for the device.
9