View And Record Video - Axis P7304 User Manual

AXIS P7304 Video Encoder
Setup
5. Select a video channel.
6. Enter the Device id and select Device type from the drop down-list. To decide which device type to use, see the
documentation supplied with the PTZ driver.
7. Go to the PTZ tab and check that the PTZ settings are available.
Create a guard tour with preset positions
A guard tour displays the video stream from different preset positions either in a predetermined or random order, and for configurable
periods of time.
1. Go to Settings > PTZ > Guard tours
2. Click +.
3. Select Preset position.
4. To edit the guard tour's properties, click
5. Type a name for the guard tour and specify the pause length in minutes between each tour.
6. If you want the guard tour to go to the preset positions in a random order, turn on Shuffle.
7. Click Done.
8. Click Add to add the preset positions that you want in your guard tour.
9. Click Done to exit the guard tour settings.
10. To schedule the guard tour, go to System > Events.

View and record video

To learn more about settings for viewing and recording video, see Streaming and storage on page 14.
Reduce bandwidth and storage
Important
If you reduce the bandwidth it can result in loss of details in the picture.
1. Go to live view and select H.264.
2. Go to Settings > Stream.
3. Do one or more of the following:
- Turn on the Zipstream functionality and select the desired level.
Note
The zipstream settings are used for both H.264 and H.265.
- Turn on dynamic GOP and set a high GOP length value.
- Increase the compression.
- Turn on dynamic FPS.
Note
Web browsers do not support H.265 decoding. Use a video management system or application supporting H.265 decoding.
9