Configure Your Device; Set Video Input; Adjust The Image - Axis P7304 User Manual

Video encoder

Hide thumbs Also See for P7304:

Table of Contents

AXIS P7304 Video Encoder

Configure your device

To use the video encoder, you must set the video inputs for the connected cameras (channels). When you log in to your device for the

first time, the automatically detected video inputs for the cameras are set to Automatic.

To change the video inputs:

1. Go to System > Video input.

2. Select Manual and select the video standard and resolution for each channel you want to change.

3. Click Save changes & restart.

Configure Quad HD or 4K resolution

Quad HD (1440p) or 4K (2160p) resolution is only supported on channel 1. Once it is configured on channel 1, channel 3 is disabled.

You must manually configure Quad HD or 4K resolution:

1. Go to System > Video input.

2. Under Channel 1, select Manual.

Select the video standard and Quad HD or 4K resolution.

4. Click Save changes & restart.

This section includes instructions about configuring your device. If you want to learn more about how certain features work, go

to Learn more on page 37.

Level the camera

To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment

of the camera.

1. Go to Video > Image > and click

2. Click

3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.

Monitor long and narrow areas

Use corridor format to better utilize the full field of view in a long and narrow area, for example a staircase, hallway, road, or tunnel.

to show the level grid.

Table of Contents