Page 1
® UNIVERSAL REMOTE DISPLAY Revision A Document No. DOC00011 OMNTEC Mfg., Inc. has been certified by DQS Inc. to ISO 9001:2015 OMNTEC Mfg., Inc. | 2420 Pond Road | Ronkonkoma | NY 11779 | (631) 981-2001 | OMNTEC@OMNTEC.com | www.OMNTEC.com...
Page 2
**NO RESPONSE** status, and disabled tanks. (See Figure 1.0) After connecting and establishing communication to an ATG, the MMRD7 will update its information and mirror the ATG. (See Figure 2.0) Figure 2.0 Document No.: DOC00011_A.docx www.OMNTEC.com Revision Date: 11-30-2023 Page 2 of 8...
Page 3
(See Figure 5.0) Please note the INFORMATION icon button (“i” in a circle) in the upper right for SYSTEM SETUP descriptions. Figure 5.0 Document No.: DOC00011_A.docx www.OMNTEC.com Revision Date: 11-30-2023 Page 3 of 8...
COMM TYPE, BAUD RATE, PARITY, and other options. Match these to the main ATG. You must press the SAVE button to save any changes made. (See Figure 7.0) Figure 7.0 Document No.: DOC00011_A.docx www.OMNTEC.com Revision Date: 11-30-2023 Page 4 of 8...
Page 5
When multiple MMRD7 are connected via RS-485 or an RS-232-422 extender, the farthest MMRD7 from the ATG is set for TRANSMITTER and each additional MMRD7, in between, is set for RECEIVER. Important: Always press SAVE when you are finished making changes. Document No.: DOC00011_A.docx www.OMNTEC.com Revision Date: 11-30-2023 Page 5 of 8...
(See Figure 11.0) Figure 11.0 Pressing on a specific alarm box will bring up a QWERTY keypad for data entry. (See Figure 11.1) Figure 11.1 Document No.: DOC00011_A.docx www.OMNTEC.com Revision Date: 11-30-2023 Page 6 of 8...
General Settings page. Additionally, you can save the percentage of the constant screen brightness level on the MMRD7 by pressing one of the seven pre- defined brightness settings and then the SAVE BRIGHTNESS button. (See Figure 12.1) Document No.: DOC00011_A.docx www.OMNTEC.com Revision Date: 11-30-2023 Page 7 of 8...
Page 8
The MMRD7 can perform a software update, when required, by pressing the SOFTWARE UPDATE button. (See Figure 13.0) Additional information on performing a software update is available on the OMNTEC website. Figure 13.0 Document No.: DOC00011_A.docx www.OMNTEC.com Revision Date: 11-30-2023 Page 8 of 8...