abc PU00 Manual page 52

Parameter
Number
P2-21
P2-22
P2-28
P2-31
EN
P2-29
P2-30
P2-32
P2-33
P2-46
P2-47
P2-48
P2-50
Parameter
Name
0：No Action
2：Stop and Warning
3：Jog and Warning
4：Run to Max Speed P5-03 and Warning
Action for DI as
5：Alarm Fault and Trip to stop
External Fault Input
6：Warning
7: failure and free operation and shutdown.
8: only running input is valid (output action is
consistent with option 7)
DO Function
0: No operation;；1: Drive ready,
Selection -
2: Remote control ready
Terminal DO1
3: Drive ready/stop
Relay Output
4: Drive running, the drive is running;
Function Selection
5: Drive running/No warning, the drive is running
- RL1
and no warning is present;
6: Run in current range
7: Run on reference
8: Reverse
10: Alarm
11: Alarm or warning
12: Thermal warning
13: Ready
14: Remote ready
15: Bus OK
20: Out of current range
21: Below current low
22: Above current high
23: Out of frequency range
Relay Output
24: Below frequency low,
Function Selection
25: Above frequency high
- RL2
26: Out of feedback range
27: Below feedback low
28: Above feedback high
29: Out of reference range
30: Below reference low
31: Above reference high
40: Drive in Local mode;
41: Drive in Remote mode;
42: Mech. brake control,
43: External alarm
44: Unbalance warning
47：Counter A
48：Counter B
Relay on Delay
0.00~600.00
Time - RL1
Relay off Delay
0.00~600.00
Time - RL1
Relay on Delay
0.00~600.00
Time - RL2
Relay off Delay
0.00~600.00
Time - RL2
Save DI Counter
0：Save None; 1：Save Counter A
Value at Power
2： Save Counter B; 3： Save Both Counter A and B
down
Counter A Preset
0~65535
threshold
Counter B Preset
0~65535
threshold
Min Frequency for
0.00~P2-51
Pulse Input 1
Value Range
50
Factory
Unit
Default
0
0
10
0
s 0.00
s 0.00
s 0.00
s 0.00
0
65535
65535
kHz 0.00