JETWAY PLE01 User Manual page 22

2 ——————— ee
Iaaanahn#ERHEaEamaRR————————————————————————
18
. Be sure all the switch are off, and check that the power supply input voltage is
i)
Oo
4.
Nn
After all connections are made, close your computer case cover.
a. Your monitor.
Beep
One short beep when displaying logo
Long beeps in an endless loop
beeps
working
One long beep followed by three short
High frequency beeps when system is
Meaning
No error during POST
No DRAM install or detected
CPU overheated —
System running at a lower frequency
6. During power-on, press <Delete> key to enter BIOS setup. Follow the
instructions in BIOS SETUP.
7. Power off your computer: You must first exit or shut down your operating
system before switch off the power switch. For ATX power supply, you can press
ATX power switching after exiting or shutting down your operating system. If you
use Windows 9X, click "Start" button, click "Shut down" and then click "Shut
down the computer?" The power supply should turn off after windows shut
down,