This manual explains the installation, maintenance, and troubleshooting of this video display system. For additional information regarding the safety, installation, operation, or service of this system, refer to the telephone numbers listed in Daktronics Exchange and Repair & Return Programs (p.7). This manual contains only generic installation topics and is not specific to a particular installation.
Module Numbers Figure 3 explains the module labeling method in more detail, and Figure 4 illustrates how Daktronics numbers modules on a video display. Used to differentiate display face if system has more than one viewing face “A” denotes the first face, “B” the second, etc.
If any modifications of this nature are made, detailed drawings of the change(s) must be submitted to Daktronics engineering staff for evaluation and approval, or the warranty will be null and void.
Glossary Lanyard attachment ring: a ring found on the back of each module. The lanyard attaches to the ring to keep the module from falling to the ground. Latch release: a device that holds the module firmly to the display frame. There is one at the top of each module.
& return program. Exchange Program Daktronics unique Exchange Program is a quick service for replacing key parts in need of repair. If a part requires repair or replacement, Daktronics sends the customer a replacement, and the customer sends the defective part to Daktronics. This decreases display downtime.
Customer Service immediately. Daktronics expects immediate return of an exchange part if it does not solve the problem. Daktronics also reserves the right to refuse parts that have been damaged due to acts of nature or causes other than normal wear and tear.
Warranty & Limitation of Liability The Daktronics Warranty & Limitation of Liability statement is located in Appendix C: Daktronics Warranty & Limitation of Liability (p.15). The warranty is independent of extended service agreements and is the authority in matters of service, repair, and display operation.
Reference Documents Use the following documents in the order listed: • DVX-2101/28X1 Series Vertical Mounting Matrix Structure Placement & Verification Quick Guide (DD3547628) • DVX-2101/2801/2891 Series Section Crating Quick Guide (DD3542367) • DVX-2101/2801/2891 Series Section Basics Quick Guide (DD3520151) • DVX-2101/2801/2891 Series Section Lifting Quick Guide (DD3542415) •...
Reference Drawings Refer to Numbering Conventions (p.1) for information regarding how to read the drawing number. These drawings offer general information pertaining to most DVX-2101/2801/2891 series displays and are listed in numeric order. Any contract-specific drawings take precedence over the general drawings. Layout, Component Placement &...
Daktronics Warranty & Limitation of Liability This section includes the Daktronics Warranty & Limitation of Liability statement. Daktronics Warranty & Limitation of Liability...
Need help?
Do you have a question about the DVX-2101 Series and is the answer not in the manual?
Questions and answers