Setting up the TV automatically
After you have finished connecting your TV,
you will want to run AUTO PROGRAM to set
up your channels.
The AUTO PROGRAM feature does not apply for
installations that use a cable box for all channel
selection.
Hi fis ©
* Perform this function during the day, with the
antenna and/or cable properly connected, to ensure
that all available channels will be broadcasting and
receivable.
¢ Ifyour cable or antenna is connected to AUX,
press ANT until AUX appears next to the channel
number.
Using the buttons on the top of the TV:
he
0 0 0
- VOLUME
+
— CHANNEL +
0
0
POWER
Press POWER to turn on the TV.
The initial setup screen appears.
POWER
Press CH + to run AUTO PROGRAM
or
press CH — to exit.
0)
— CHANNEL +
AUTO PROGRAM: [ CH + ]
EXIT:
[CH -]
First please connect
cable/antenna
AUTO
PROGRAM
To reset your TV to factory settings, turn the TV on.
Then, while pressing the RESET button en your remote
control, press the POWER button on your TV. The TV
will turn itself off, then back on.
13