Sony Trinitron WEGA KV-27FV15 Operating Instructions Manual page 17

Connecting S-Link to a VCR
KV-27FV15, 32FV15, 36FV15 only
S-Link automatically powers on the TV and
switches to the correct video input when a
tape is inserted in the VCR.
1 Using A/V connectors, connect AUDIO
and VIDEO OUT on your VCR to AUDIO
and VIDEO IN on your TV.
2 Using an S-Link connector (mono mini
plug), connect S-LINK on your VCR to
S-LINK/CONTROL S-OUT in the same
VIDEO IN column on your TV.
Connecting S-Link to a satellite
receiver
KV-27FV15, 32FV15, 36FV15 only
When you power on the satellite receiver ,
S-Link automatically powers on the TV and
switches to the correct video input.
1 Using A/V connectors, connect AUDIO
and VIDEO OUT on your satellite receiver
to AUDIO and VIDEO IN on your TV.
2 Using an S-Link connector (mono mini
plug), connect S-LINK on your satellite
receiver to S-LINK/CONTROL $-OUT in
the same VIDEO IN column on your TV.
Note
The S-Link feature will override the "SKIP"
VIDEO LABEL input, (see page 22).
AUDIO-R (red)
AUDIO! Gvhite}
VIDEO IN
1 «
@
©)
TPO)
©
Setelite receiver (Kear at fy)
a4