Step 3: Setting Up The Tv Automatically; (Auto Set Up) - Sony Trinitron KV-27S20 Operating Instructions Manual

Step 3: Setting up
the TV automatically
(AUTO SET UP)
You can set up your TV easily by using the AUTO SET
UP feature. It presets all the receivable channels.
To set up the TV manually, see "Setting cable TV on or
off" (page 14) and "Presetting channels" (page 14).
—~
(Front of TV)
SETUP TVVIDEQ = - VOLUME + -CHANNEL+ POWER
COE EDU
O © STAND BY/STEREO
Before you start using AUTO SET UP, be sure to
connect the antenna or cable to the TV (see
page 5).
1 Press POWER to turn on the TV.
The AUTO SET UP screen appears.
POWER
ENGLISH {CH+}
ESPANOL (cH-}
. " AUTO SETUP: [VOL-}
DEMO (TV:VIDEO]
First please connect
the antenna
Press [SETUP] to exit
Note
¢ The AUTO SET UP screen appears whenever you press
the POWER button if you do not execute AUTO
PROGRAM.
2 (Except Canadian models)
Press CHANNEL + to select English screens
or CHANNEL - to select Spanish screens.
12 | Getting Started
3 Press VOLUME -.
— VOLUME +
AUTO PROGRAM
"AUTO PROGRAM" appears on the screen and
the TV starts scanning and presetting channels
automatically. When all the receivable channels are
stored, "AUTO PROGRAM" disappears and the
lowest numbered channel is displayed. If the TV
receives cable TV channels, CABLE is set to ON
automatically.
To perform AUTO SET UP again
1 Press SET UP on the TV.
2 (Except Canadian models)
Press CHANNEL + or CHANNEL - to select the
language.
3 Press VOLUME -.
The picture and sound settings will be set to the
factory preset conditions.
4 Press CHANNEL +.
"AUTO PROGRAM?" appears on the screen and the
TV starts scanning and presetting channels.
5 Press CHANNEL - to exit the AUTO SET UP menu.
To exit AUTO PROGRAM
Press any button.
Note
* If the TV is set to a video input, you cannot execute AUTO SET
UP. Press TV (black button) so that a channel number appears.
To browse the main functions (DEMO)
Press TV/ VIDEO on the TV in step 3. The functions
and menus are displayed one by one.
To exit DEMO
Press any button.