Sony Trinitron WEGA KV-27FV15 Operating Instructions Manual page 36

Losi
© Insome rare cases, vou may net be able to aperate
uot e c g e r te pe
wour non-Sony video equipment with the supplied
remote control. li this case, please use the
equipmient's own remote control.
¢ When you remove the batteries, the code mumber may
revert to the factory setting.
¢ The code numbers for Sony VCRs are assigned at the
factory as follows:
VHS VCR 301
(preset code for the
supplied remote control)
8mm VCR 302
Beta, ED Beta VCRs 303
30
Laserdisc
code numbers
Manufacturer Code
Sony 701
Panasonic 704, 710
Pioneer 702
rT
Operating a Buttons on the remote
Laserdisc control
To turn on or off Press VTR/DVD (POWER).
To play Press >.
To stop Press Mf.
To pause Press 8.
To resume normal playback,
press again or press >.
To scan Press PP or <4 during
playback.
To resume normal playback,
press >.
To search the Press CH +/-.
chapter forward or
backward
fyp o
If you will not be programming a satellite receiver or
cable box into the SAT/CABLE function of your remote,
you can use it to program other video equipment (e.g.
DVD, MDP, or second VCR).
DVD (Digital Versatile Disc)
code numbers
Manufacturer Code
Sony 751
Panasonic 753
Pioneer 752
RCA 755
Toshiba 754
Operating aDVD Buttons on the remote
player control
To turn on or off Press VTR/DVD (POWER).
To play Press >.
To stop Press i.
To pause Press UI.
To resume normal playback,
press again or press b>.
To scan Press ® or <4 during
playback.
To resume normal playback,
press >.
To search the Press CH +/-.
chapter forward or
backward
To select chapters 0-9 + ENTER.
directly
MENU Press to display DVD menu.
To move cursor in Use your arrow buttons
menu 4,4, 4,9.