Download  Print this page

Advertisement

HISTORY INFORMATION FOR THE FOLLOWING MANUAL:

SERVICE MANUAL

MODEL NAME
KV-27FV300
KV-27FV300
KV-29FV300
KV-29FV300
KV-32FV300
KV-32FV300
KV-36FV300
KV-36FV300
KV-36FV300
ORIGINAL MANUAL ISSUE DATE: 3/2002
ALL REVISIONS AND UPDATES TO THE ORIGINAL MANUAL ARE APPENDED TO THE END OF THE PDF FILE.
REVISION DATE
3/2002
5/2002
10/2002
9-965-924-03
REMOTE COMMANDER
RM-Y181
RM-Y181
RM-Y181
RM-Y181
RM-Y182
RM-Y182
RM-Y182
RM-Y182
RM-Y182
REVISION TYPE
SUBJECT
No revisions or updates are applicable at this time.
Correction - 1
Critical parts incorrectly indentified in Exploded View, Electrical Parts
List, A Board Schematic.
Correction - 2
Exploded View PN correction for Door
BA-5D
DESTINATION
CHASSIS NO.
US
SCC-S65AA
CND
SCC-S64AA
LATIN NORTH
SCC-S62BA
LATIN SOUTH
SCC-S62CA
US
SCC-S65BA
CND
SCC-S64BA
US
SCC-S65CA
CND
SCC-S64CA
HAWAII
SCC-S67AA
TRINITRON
COLOR TELEVISION
®
CHASSIS

Advertisement

Chapters

Table of Contents

   Related Manuals for Sony TRINITRON KV-27FV300

   Summary of Contents for Sony TRINITRON KV-27FV300

  • Page 1: Service Manual

    HISTORY INFORMATION FOR THE FOLLOWING MANUAL: BA-5D SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-27FV300 RM-Y181 SCC-S65AA KV-27FV300 RM-Y181 SCC-S64AA KV-29FV300 RM-Y181 LATIN NORTH SCC-S62BA KV-29FV300 RM-Y181 LATIN SOUTH SCC-S62CA KV-32FV300 RM-Y182 SCC-S65BA KV-32FV300 RM-Y182 SCC-S64BA KV-36FV300 RM-Y182 SCC-S65CA KV-36FV300...
  • Page 2 Self Diagnosis Supported model BA-5D SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-27FV300 RM-Y181 SCC-S65AA KV-27FV300 RM-Y181 SCC-S64AA KV-29FV300 RM-Y181 LATIN NORTH SCC-S62BA KV-29FV300 RM-Y181 LATIN SOUTH SCC-S62CA KV-32FV300 RM-Y182 SCC-S65BA KV-32FV300 RM-Y182 SCC-S64BA KV-36FV300 RM-Y182 SCC-S65CA KV-36FV300 RM-Y182 SCC-S64CA...
  • Page 3: Table Of Contents

    KV-27FV300/29FV300/32FV300/36FV300 TABLE OF CONTENTS SECTION TITLE PAGE Specifi cations............................4 Warnings and Cautions......................... 5 Safety Check-Out ..........................6 Self-Diagnostic Function........................7 1. Disassembly 1-1. Rear Cover Removal ........................10 1-2. Chassis Assembly Removal ......................10 1-3. Service Position........................... 10 1-4. Picture Tube Removal ......................... 11 Anode Cap Removal Procedure ....................
  • Page 4: Specifi Cations

    Remote Control RM-Y182 (1) (KV-32FV300/36FV300) • Wireless Headphones (1) (KV-32FV300/36FV300) The ( ) SRS (SOUND RETRIEVAL SYSTEM) is manufactured by Sony Corporation under license from SRS Labs, Inc. It is covered by U.S. Patent No. Optional Accessories 4,748,669. Other U.S. and foreign patents pending.
  • Page 5: Warnings And Cautions

    Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi...
  • Page 6: Safety Check-out

    KV-27FV300/29FV300/32FV300/36FV300 SAFETY CHECK-OUT Leakage Test After correcting the original service problem, perform the following The AC leakage from any exposed metal part to earth ground and from safety checks before releasing the set to the customer: all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes).
  • Page 7: Self-diagnostic Function

    KV-27FV300/29FV300/32FV300/36FV300 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY/TIMER LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 8 KV-27FV300/29FV300/32FV300/36FV300 Stopping the Standby/Timer LED Flash Turn off the power switch on the TV main unit or unplug the power cord from the outlet to stop the STANDBY/TIMER LAMP from fl ashing. Self-Diagnostic Screen Display For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confi rmed, it is possible to bring up past occurrences of failure on the screen for confi...
  • Page 9 KV-27FV300/29FV300/32FV300/36FV300 +B overcurrent (OCP) Occurs when an overcurrent on the +B (135V) line is detected by pin 48 of IC001 (A Board). If the voltage of pin 48 of IC001 (A Board) is less than 1V when V.SYNC is more than seven verticals in a period, the unit will automatically turn off. +B overvoltage (OVP) Occurs when a high is felt onpin 2 of IC501 (A Board).
  • Page 10: Disassembly

    KV-27FV300/29FV300/32FV300/36FV300 SECTION 1: DISASSEMBLY 1-1. REAR COVER REMOVAL 4 Screws +BVTP 4 x 16 Rear Cover 4 Screws +BVTP 4 x 16 4 Screws +BVTP 4 x 16 1-2. CHASSIS ASSEMBLY REMOVAL 7 Screws +BVTP 4 x 16 1-3. SERVICE POSITION Claw Chassis Assembly C Board...
  • Page 11: Picture Tube Removal

    KV-27FV300/29FV300/32FV300/36FV300 1-4. PICTURE TUBE REMOVAL WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT coated earth ground strap.
  • Page 12: Set-up Adjustments

    KV-27FV300/29FV300/32FV300/36FV300 SECTION 2: SET-UP ADJUSTMENTS The following adjustments should be made when a complete Perform the adjustments in order as follows: realignment is required or a new picture tube is installed. Beam Landing These adjustments should be performed with rated power supply Convergence voltage unless otherwise noted.
  • Page 13: Convergence

    KV-27FV300/29FV300/32FV300/36FV300 2-2. CONVERGENCE OPERATION OF BMC (HEXAPOLE) MAGNET Preparation: The respective dot positions resulting from moving each magnet interact, • Perform FOCUS, V. LIN and V. SIZE adjustments. so perform adjustment while tracking. • Set BRIGHTNESS control to minimum. 1 Use the V.STAT tabs to adjust the red, green, and blue dots so they •...
  • Page 14: Tlh Plate Adjustment

    KV-27FV300/29FV300/32FV300/36FV300 DYNAMIC CONVERGENCE ADJUSTMENT TLH PLATE ADJUSTMENT Before starting, perform Vertical and Horizontal Static Convergence Preparation: Adjustment. • Input crosshatch pattern. • Adjust Picture Quality to standard, Picture and Brightness to 50%, and 1. Slightly loosen defl ection yoke screw. Other to standard.
  • Page 15: Focus

    KV-27FV300/29FV300/32FV300/36FV300 2-3. FOCUS 2-5. WHITE BALANCE ADJUSTMENTS 1. Input monoscope signal. 2. Set user controls to normal. 3. Set video mode to STANDARD. 4. Set the PICTURE to maximum. 5. Adjust at 325 Mark for best center/corner focus balance. 6. Receive an entire white signal. Make sure Magenta Ring is at an acceptable level.
  • Page 16: Safety Related Adjustments

    KV-27FV300/29FV300/32FV300/36FV300 SECTION 3: SAFETY RELATED ADJUSTMENTS HOLD-DOWN READJUSTMENT 3-1. X R530, R531 CONFIRMATION METHOD (HOLD-DOWN CONFIRMATION) AND If the setting indicated in Step 2 of Hold-Down Operation Confi rmation READJUSTMENTS cannot be met, readjustment should be performed by altering the resistance value of R530, R531 component marked with X.
  • Page 17: Circuit Adjustments

    KV-27FV300/29FV300/32FV300/36FV300 SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y181, RM-Y182) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-2. MEMORY WRITE CONFIRMATION 4-1.
  • Page 18: Service Data Lists

    KV-27FV300/29FV300/32FV300/36FV300 4-4. SERVICE DATA LISTS — 18 —...
  • Page 19 KV-27FV300/29FV300/32FV300/36FV300 SERVICE DATA LISTS — 19 —...
  • Page 20 KV-27FV300/29FV300/32FV300/36FV300 SERVICE DATA LISTS — 20 —...
  • Page 21 KV-27FV300/29FV300/32FV300/36FV300 SERVICE DATA LISTS — 21 —...
  • Page 22 KV-27FV300/29FV300/32FV300/36FV300 SERVICE DATA LISTS — 22 —...
  • Page 23 KV-27FV300/29FV300/32FV300/36FV300 SERVICE DATA LISTS — 23 —...
  • Page 24 KV-27FV300/29FV300/32FV300/36FV300 SERVICE DATA LISTS — 24 —...
  • Page 25 KV-27FV300/29FV300/32FV300/36FV300 SERVICE DATA LISTS — 25 —...
  • Page 26: Id Map Table

    KV-27FV300/29FV300/32FV300/36FV300 4-5. ID MAP TABLE 7. Adjust the value of SCON with 3 and 6 for 1.90 ± 0.05Vpp for 27/29/32/34”, or 1.95 ± 0.05Vpp for 36/38”. 4-6. A BOARD ADJUSTMENTS 8. Reset AALS, ABLS, GON and BON values to “1”. H.
  • Page 27 KV-27FV300/29FV300/32FV300/36FV300 H. SIZE ADJUSTMENT (HSIZ) 6. While showing the SHUE item, adjust the waveform with 1 and 4 until the second and third bars show the same level 1. Input a monoscope signal. (V2 = V3 < 0.15Vp-p). 2. Activate the Service Adjustment Mode. 7.
  • Page 28: Service Adjustment Mode Memory

    KV-27FV300/29FV300/32FV300/36FV300 V. ANGLE (VANG), V. BOW (VBOW), UPPER PIN (UPIN) AND LOW PIN (LPIN) ADJUSTMENTS 1. Input a crosshatch signal. 2. Activate the Service Adjustment Mode. 3. Select VANG, VBOW, UPIN, and LPIN with 1 and 4 . 4. Adjust with 3 and 6 for the best picture. 5.
  • Page 29: Diagrams

    KV-27FV300/29FV300/32FV300/36FV300 SECTION 5: DIAGRAMS 5-1. CIRCUIT BOARDS LOCATION The components identifi ed by shading and symbol are critical for safety. Replace only with part number specifi ed. The symbol indicates a fast operating fuse and is displayed on the component side of the board.
  • Page 30: Block Diagram And Schematics

    KV-27FV300/29FV300/32FV300/36FV300 5-3. BLOCK DIAGRAM AND SCHEMATICS Audio Amplifier TDA8580J 10W&15W Audio Processor NJW1134 (For FV only) For FS only 135V Power Mosfet 12.5V 2SK2876 Focus — 30 —...
  • Page 31: A Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 A BOARD SCHEMATIC DIAGRAM — — — — — — — — — — — — — — — — 31 —...
  • Page 32 KV-27FV300/29FV300/32FV300/36FV300 [TUNING CONTROL, DEFLECTION, TUNER/IF, Y/C JUNGLE, MTS] — 32 —...
  • Page 33 KV-27FV300/29FV300/32FV300/36FV300 A BOARD LOCATOR LIST DIODE TRANSISTOR — 33 —...
  • Page 34 KV-27FV300/29FV300/32FV300/36FV300 A BOARD WAVEFORM 2.14V p-p (H) 4.5V p-p (H) 1.2V p-p (H) 0.7V p-p (H) 0.9V p-p (H) 4.7V p-p (V) 2.2V p-p (H) 1.2V p-p (H) 1.2V p-p (V) 6.6V p-p (H) 1.8V p-p (H) 1.2V p-p (V) 5.9V p-p (H) 3.9V p-p (H) 3.0V p-p (H)
  • Page 35 KV-27FV300/29FV300/32FV300/36FV300 A BOARD MARK(*) LIST KV-27FV300 REF. NO. LOCATION KV-29FV300 KV-32FV300 KV-36FV300 — 35 —...
  • Page 36: Ic Block Diagram

    KV-27FV300/29FV300/32FV300/36FV300 IC BLOCK DIAGRAM — 36 —...
  • Page 37 KV-27FV300/29FV300/32FV300/36FV300 A BOARD IC VOLTAGE LIST IC001 IC301 IC403 VOLT VOLT VOLT IC561 VOLT IC6008 VOLT IC404 VOLT IC002 IC400 IC402 VOLT VOLT VOLT IC003 VOLT IC501 VOLT — 37 —...
  • Page 38 KV-27FV300/29FV300/32FV300/36FV300 A BOARD TRANSISTOR VOLTAGE LIST Q001 Q400 Q002 Q401 Q003 Q402 Q004 Q403 Q005 Q404 Q010 Q405 Q110 Q406 Q300 Q407 Q304 Q501 Q305 Q502 Q306 Q507 Q307 Q511 Q308 Q512 Q309 Q530 Q314 Q531 Q315 Q532 Q316 Q561 Q317 Q562 Q319...
  • Page 39: Bc Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 BC BOARD SCHEMATIC DIAGRAM D2.5V 2.5V Q3502 2SB709A-QRS-TX Q3505 R3524 R3523 R3528 2SD601A-QRS-TX BUFFER BUFFER 1/16W 1/16W 1/16W R3532 Q3504 2SB709A-QRS-TX 1/16W Q3503 R3529 BUFFER 2SD601A-QRS-TX R3588 :CHIP BUFFER R3520 1/16W 4.7k CN3500 — 1/16W R3531 R3521 C3532 R3525 C3535 C3534 1/16W...
  • Page 40 KV-27FV300/29FV300/32FV300/36FV300 BC BOARD WAVEFORM [3D COMB FILTER, SRT, Y/C SEP] COMPONENT SIDE 0.7 Vp-p (H) 1.0 Vp-p (H) 0.75 Vp-p (H) 2.16 Vp-p (H) 1.25 Vp-p (H) 1.75 Vp-p (H) [3D COMB FILTER, SRT, Y/C SEP] CONDUCTOR SIDE — 40 —...
  • Page 41 KV-27FV300/29FV300/32FV300/36FV300 %& %2$5' ,& 92/7$*( /,67 1& 1& ,& 92/7 1& 1& 1&  1& 1& 1& 1& 1& 1&  1& 1& 1& 1& 1& 1& 1& 1& 1& 1& 1& 1& ,& 1& 1& 92/7 1& 1& 1& 1&...
  • Page 42: Hu Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 HU BOARD SCHEMATIC DIAGRAM S1008 S1007 R1003 — R1002 R1001 1.8k 4.7k R2008 R2010 R2009 CN1001 R2011 4.7k 1.8k TO A BOARD CN006 S2002 S2004 S2001 S2005 S2003 MENU VOL- VOL+ TV/V — J2231 CN1002 TO A BOARD R2239 CN005 AUDIO L2 C2240...
  • Page 43 KV-27FV300/29FV300/32FV300/36FV300 [SPACER] (KV-32FV300/36FV300 0NLY) [FRONT PANEL] — 43 —...
  • Page 44: P Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 P BOARD SCHEMATIC DIAGRAM 3 %2$5' ,& 92/7$*( /,67 ,& 92/7 1& — 1& ,& 92/7 1&  — $OO YROWDJHV DUH LQ 9 — P BOARD TRANSISTOR TABLE Q151 Q152 — Q3300 Q3301 Q3302 Q3304 Q3305 Q3307 — Q3308 Q3309 Q3310...
  • Page 45 KV-27FV300/29FV300/32FV300/36FV300 [PIP] P BOARD WAVEFORM 3.5 Vp-p (H) 3.75 Vp-p (H) 1.0 Vp-p (H) — 45 —...
  • Page 46: Hr Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 HR BOARD SCHEMATIC DIAGRAM HR BOARD IC VOLTAGE TABLE IC3001 IC3001 SBX3071-71 VOLT DETECTOR CN3001 — :S-MICRO D3002 TO A BOARD LNJ801LPDJA All voltages are in V. TIMER LED R3001 CN003 TIMER LED C3001 MPWR LED STBY 5V SIRCS POWER ON R3014 —...
  • Page 47: T Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 T BOARD SCHEMATIC DIAGRAM (KV-32FV300/36FV300 ONLY) T BOARD IC VOLTAGE TABLE IC401 R402 R439 C426 D408 2.7k 0.01 IC401 DAL5815 VOLT 1/16W 1/16W :CHIP BA3308 :CHIP B:CHIP PRE-AMP Q410 D409 D404-411 R401 2SB709A DAL5815 D404 (INFRARED EMITTER) BUFFER 1/16W DAL5815 :CHIP D410...
  • Page 48: C Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 C BOARD SCHEMATIC DIAGRAM CN704 R718 TO A BOARD R716 100k (T503) 1/2W J701 ² G1-1 C707 G4 HV 0.0047 KR G1 RV701 V STAT CONTROL 110M G1-3 G1-2 TAB (CONTACT) CN702 :PIN-J R715 560k 1/2W CN707 D704 RGP10GPKG23 ²...
  • Page 49 KV-27FV300/29FV300/32FV300/36FV300 [RGB DRIVE, CRT DRIVE] C BOARD IC VOLTAGE TABLE IC701 VOLT -13.0 12.0 IC702 VOLT 200.0 139.7 142.0 138.6 All voltages are in V. C BOARD WAVEFORM 4.10 p-p (H) 3.50V p-p (H) 3.50V p-p (H) 164.1V p-p (H) 145.3 V p-p (H) 134.4V p-p (H) C BOARD MARK(*) LIST...
  • Page 50: Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 V BOARD SCHEMATIC DIAGRAM — — — — — — 50 —...
  • Page 51 KV-27FV300/29FV300/32FV300/36FV300 [VELOCITY MODULATION] V BOARD MARK(*) LIST KV-27FV300 KV-32FV300 REF. NO. LOCATION KV-29FV300 KV-36FV300 R814 68 1W 9 %2$5' ,& 92/7$*( /,67 9 %2$5' 75$16,6725 7$%/( 1& ,& & 92/7  4 4 4 4  4    4 4 1&...
  • Page 52: Gk Board Schematic Diagram

    KV-27FV300/29FV300/32FV300/36FV300 GK BOARD SCHEMATIC DIAGRAM — — — — — — — — — — 52 —...
  • Page 53 KV-27FV300/29FV300/32FV300/36FV300 [POWER SUPPLY, AUDIO] GK BOARD LOCATOR LIST DIODE D1401 A-11 IC1405 C-10 D501 IC1406 A-10 D600 IC600 D601 IC601 D611 IC602 D612 IC605 D-10 D613 IC609 TRANSISTOR D614 D615 Q1401 B-11 D618 Q509 D620 Q600 D621 Q601 D624 Q605 D625 Q606 D628...
  • Page 61: Electrical Parts List

    KV-27FV300/29FV300/32FV300/36FV300 SECTION 7: ELECTRICAL PARTS LIST NOTE: The components identiÞ ed by shading RESISTORS The components in this manual identiÞ ed by the following mark are critical for safety. Replace only • All resistors are in ohms symbol: indicate parts that have been carefully factory- with part number speciÞ...
  • Page 62 KV-27FV300/29FV300/32FV300/36FV300 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C054 1-126-963-11 ELECT 4.7µF C340 1-126-767-11 ELECT 1000µF C055 1-126-933-11 ELECT 100µF C341 1-126-947-11 ELECT 47µF C060 1-164-230-11 CERAMIC CHIP 220pF C343 1-107-826-11 CERAMIC CHIP 0.1µF C062 1-125-837-91 CERAMIC CHIP 1µF...
  • Page 63 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 64 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 65 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 66 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 67 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 68 KV-27FV300/29FV300/32FV300/36FV300 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R224 1-249-409-11 CARBON 1/4W R343 1-216-833-11 RES-CHIP 1/10W R225 1-216-845-11 RES-CHIP 100K 1/10W R344 1-216-853-11 RES-CHIP 470K 1/10W R228 1-216-845-11 RES-CHIP 100K 1/10W R345 1-216-845-11 RES-CHIP 100K 1/10W R229 1-216-845-11...
  • Page 69 KV-27FV300/29FV300/32FV300/36FV300 A component identiÞ ed by this symbol indicates that it NOTE: The components identiÞ ed by shading has been carefully factory-selected to satisfy regulations mark are critical for safety. Replace only regarding X-ray radiation. Should replacement be required, with part number speciÞ ed. replace only with the value originally used.
  • Page 70 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 71 KV-27FV300/29FV300/32FV300/36FV300 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C3532 1-126-964-11 ELECT 10µF C3533 1-164-315-11 CERAMIC CHIP 470pF C3534 1-126-960-11 ELECT 1µF A-1400-450-A BC BOARD, MOUNTED C3535 1-162-917-11 CERAMIC CHIP 15pF C3536 1-126-960-11 ELECT 1µF CAPACITOR C3537 1-126-964-11 ELECT...
  • Page 72 KV-27FV300/29FV300/32FV300/36FV300 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES DIODE TRANSISTOR D3550 8-719-977-28 DIODE UDZSTE-1710B Q3500 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q3501 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX Q3502 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX FERRITE BEAD Q3503 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX FB3502 1-414-234-22 FERRITE 0µH Q3504 8-729-424-02...
  • Page 73 KV-27FV300/29FV300/32FV300/36FV300 BC HU REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R3521 1-216-817-11 RES-CHIP 1/10W R3570 1-216-839-11 RES-CHIP 1/10W R3522 1-216-817-11 RES-CHIP 1/10W R3571 1-216-834-11 RES-CHIP 1/10W R3523 1-216-821-11 RES-CHIP 1/10W R3572 1-216-821-11 RES-CHIP 1/10W R3524 1-216-841-11 RES-CHIP 1/10W...
  • Page 74 KV-27FV300/29FV300/32FV300/36FV300 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES R2238 1-249-441-11 CARBON 100K 1/4W C3321 1-113-619-11 CERAMIC CHIP 0.47µF R2239 1-247-804-11 CARBON 1/4W C3322 1-164-373-11 CERAMIC CHIP 0.033µF R2240 1-247-804-11 CARBON 1/4W C3323 1-127-715-91 CERAMIC CHIP 0.22µF R2241 1-247-804-11...
  • Page 75 KV-27FV300/29FV300/32FV300/36FV300 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES L3303 1-412-058-11 INDUCTOR 10µH R3311 1-216-819-11 RES-CHIP 1/10W L3390 1-412-525-31 INDUCTOR 10µH R3312 1-216-864-11 SHORT R3313 1-216-864-11 SHORT R3314 1-216-864-11 SHORT TRANSISTOR R3318 1-216-833-11 RES-CHIP 1/10W Q151 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q152...
  • Page 76 KV-27FV300/29FV300/32FV300/36FV300 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES C415 1-162-970-11 CERAMIC CHIP 0.01µF C416 1-126-947-11 ELECT 47µF C417 1-126-963-11 ELECT 4.7µF A-1400-459-A HR (COM) BOARD, MOUNTED C418 1-162-916-11 CERAMIC CHIP 12pF C419 1-162-915-11 CERAMIC CHIP 10pF 0.50pF 50V CAPACITOR...
  • Page 77 KV-27FV300/29FV300/32FV300/36FV300 REF. NO. PART NO. DESCRIPTION VALUES REF. NO. PART NO. DESCRIPTION VALUES Q406 8-729-931-14 TRANSISTOR 2SD1858-Q-TV2 R436 1-216-797-11 RES-CHIP 1/10W Q407 8-729-931-14 TRANSISTOR 2SD1858-Q-TV2 R437 1-216-797-11 RES-CHIP 1/10W Q408 8-729-931-14 TRANSISTOR 2SD1858-Q-TV2 R438 1-216-797-11 RES-CHIP 1/10W Q409 8-729-931-14 TRANSISTOR 2SD1858-Q-TV2 R439 1-216-826-11 RES-CHIP...
  • Page 78 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 79 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 80 KV-27FV300/29FV300/32FV300/36FV300 V GK NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 81 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 82 KV-27FV300/29FV300/32FV300/36FV300 NOTE: Les composants identiÞ es per un trame et une NOTE: The components identiÞ ed by shading marque sont critiques pour la securite. Ne les mark are critical for safety. Replace only remplacer que par une piece portant le numero speciÞ e. with part number speciÞ...
  • Page 83 4-041-423-01 SHEET, PROTECTION 1-476-681-11 REMOTE COMMANDER (RM-Y181) (KV-36FV300 ONLY) (KV-27FV300/29FV300) 4-085-910-01 CARTON, INDIVIDUAL 4-978-977-11 BATTERY COVER (KV-RM-Y181/RM-Y182) (KV-32FV300 ONLY) Sony Corporation English Sony Technology Center 2002CJ74059-1 Technical Services Printed in USA 9-965-924-03 Service Promotion Department © 2002.3 — 83 —...
  • Page 84 A BOARD SCHEMATIC DIAGRAM — — — — — — — — —...
  • Page 85 KV-27FV300/29FV300/32FV300/36FV300...
  • Page 86 — — — — — — — — 31 —...
  • Page 88: Schematic Diagrams

    PRINTING THE SERVICE MANUAL The PDF of this service manual is not designed to be printed from cover to cover. The pages vary in size, and must therefore be printed in sections based on page dimensions. NON-SCHEMATIC PAGES Data that does NOT INCLUDE schematic diagrams are formatted to 8.5 x 11 inches and can be printed on standard letter-size and/or A4-sized paper. SCHEMATIC DIAGRAMS The schematic diagram pages are provided in two ways, full size and tiled.
  • Page 89 ON-SCREEN SEARCH OPTION All of the text within the service manual PDF is content searchable. This means that you can enter any text, word, phrase or reference number that appears in the manual, and the PDF software will search, fi nd and move the cursor to the location where you requested text fi rst appears. This feature can be particularly useful in locating components on a specifi...
  • Page 90: Operating Instructions

    ® Operating Instructions 02 Sony Corporation...
  • Page 91 ® As an ENERGY STAR Partner, Sony has onto the screen. Continuously watching the same channel determined that this product or product can cause the imprint of station logos onto the TV screen.
  • Page 92: User Guide

    User Guide IMPORTANT SAFEGUARDS Object and Liquid Entry Never push objects of any kind into the set through the cabinet slots as they may touch For your protection, please read these instructions dangerous voltage points or short out parts completely, and keep this manual for future reference. that could result in a fire or electric shock.
  • Page 93: Replacement Parts

    Connecting Additional Equipment Lightning • Never block the slots and openings by placing the set on a bed, sofa, rug For added protection for this television receiver during a or other similar surface. lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.
  • Page 94 User Guide...
  • Page 95 Contents Introduction ® Introducing the FD Trinitron WEGA Features................. 1 About this Manual.......................... 2 Batteries for the Remote Control ....................2 Front Panel Menu Controls ......................2 Using the Remote Controls ......................3 Connecting Your TV TV Rear Panel ..........................8 Basic Connections .........................
  • Page 97: Introducing The Fd Trinitron Wega Features

    Introduction ® Congratulations on your purchase of the Sony FD Trinitron WEGA . Before you begin using this manual, please check the model number located on the rear of your TV or on the front cover of this manual. ®...
  • Page 98: About This Manual

    Operating Instructions About this Manual This manual provides instructions to help you enjoy your new TV. It shows you how to connect to an antenna or cable, cable box, VCR, DVD, satellite receiver, stereo system, or camcorder. Once you’re connected, follow the instructions and use the remote control to access the on-screen menus.
  • Page 99: Using The Remote Controls

    Control” on page 49. TV/VCR Press to switch between TV and VCR mode. If you have a non-Sony VCR, you will need to program the remote control to recognize your VCR. For details, see “Programming the Remote Control” on page 49.
  • Page 100 Operating Instructions Button Description POWER buttons Press to turn on and off the TV and other audio/ video equipment you have programmed into the remote control. For instructions, see “Programming the Remote Control” on page 49. FUNCTION buttons Press to select the equipment (TV, VCR/DVD, SAT/ CABLE) that you want to operate with the remote control.
  • Page 101: Outside Panel

    Introduction Model RM-Y182 For KV-32FV300, KV-36FV300 models Outside Panel Button Description Press to turn off the sound. Press again or press MUTING restore the sound. SYSTEM OFF Press to power off the equipment programmed into the remote control, see “Programming the Remote Control” on page 49.
  • Page 102 Operating Instructions Button Description POWER Press to turn on and off the TV and other audio/video buttons equipment you have programmed into the remote control. For instructions, see “Programming the Remote Control” on page 49. FUNCTION Press to select the equipment (TV, VCR/DVD, SAT/ buttons CABLE) that you want to operate with the remote control.
  • Page 103 Description TV/VCR Press to switch between TV and VCR mode. If you have a non-Sony VCR, you will need to program the remote control to recognize your VCR. For details, see “Programming the Remote Control” on page 49. VCR (operating) Operates your VCR. The VCR must be programmed into the remote control.
  • Page 104: Connecting Your Tv

    Operating Instructions Connecting Your TV Read this section before setting up your TV for the first time. This section covers basic connections in addition to any optional equipment you may be connecting. TV Rear Panel MONITOR AUDIO OUT (VAR/FIX) Jack Description 1AUX Allows you to view local and cable channels if your cable...
  • Page 105 Connecting Your TV Jack Description 5 AUDIO (L/R)/VIDEO Connects to the AUDIO and VIDEO output jacks on your VCR or other video equipment. A third video input jack (VIDEO 2) is located on the front panel of the TV. These AUDIO/VIDEO input jacks provide better picture quality than the VHF/UHF jack.
  • Page 106: Basic Connections

    Operating Instructions Basic Connections TV with Indoor or Outdoor Antenna, or CATV Cable Depending on the cable available in your home, choose one of the connections below: (not supplied) If you are connecting to an indoor or outdoor antenna, you may need to adjust the orientation of the antenna for best reception.
  • Page 107: Cable Box Connections

    Connecting Your TV Cable Box Connections Some cable TV systems use scrambled or encoded signals that require a cable box to view all channels. If you subscribe to that kind of cable service, use this connection. Scrambled signals coming in to the TV through the cable box cannot be viewed in PIP. If some of your channels are scrambled, consider using the Cable Box and Cable connection.
  • Page 108 Press the ANT button on the remote control to switch between the cable box and direct cable inputs. Your Sony remote control can be programmed to operate your cable box (see page 50). To use the cable box to change your channels, set your TV to channel 3 or 4. Use the Channel Fix...
  • Page 109: Connecting Additional Equipment

    Connecting Your TV Connecting Additional Equipment Connecting a TV and VCR Rear of TV Video (yellow) Audio L (white) Audio R (red) From cable/antenna Optional connection To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR).
  • Page 110 Operating Instructions Connecting a TV, VCR, and Cable Box Use this connection if you subscribe to a cable system that scrambles some channels (pay channels), but not all of them. This setup allows you to use the remote control to: change channels through your cable box or VCR when you are receiving a scrambled signal change channels through your TV...
  • Page 111 Connecting Your TV Optional connection If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/ VIDEO IN on your TV. For better picture quality, use S VIDEO instead of the yellow audio/video cable.
  • Page 112 Operating Instructions Connecting a TV and Satellite Receiver Rear of TV From cable/ antenna Satellite Receiver Satellite antenna Video (yellow) cable Audio L (white) Audio R (red) Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver. Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV.
  • Page 113 Connecting Your TV Connecting a TV, Satellite Receiver, and VCR Rear of TV From cable/ antenna Satellite Receiver Video (yellow) Audio L (white) Audio R (red) Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver.
  • Page 114 Operating Instructions Connecting a DVD Player Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your DVD player to AUDIO and VIDEO IN on your TV. Rear of TV Rear of DVD Player MONITOR AUDIO OUT (VAR/FIX) Video (yellow) Audio L (white) Audio R (red) For better picture quality, use S VIDEO instead of the yellow Audio/Video cable.
  • Page 115 Connecting Your TV Connecting a Camcorder Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your camcorder to AUDIO and VIDEO IN on your TV. Front A/V Panel S VIDEO Front A/V Panel Audio R (red) Audio L (white) A/V output Video (yellow) If the camcorder has an S VIDEO jack, you can use an S VIDEO cable to improve picture quality;...
  • Page 117: Using Basic Functions Setting Up The Tv Automatically

    Using Basic Functions Setting Up the TV Automatically After you have finished connecting your TV, you can perform Auto Program to set up your channels. When Auto Programming, the TV will automatically search for available channels and program receivable channels. The direction in this manual will refer to the remote control that incorporates a joystick (RM-Y182).
  • Page 118: Quick Start To The Menus

    Operating Instructions Quick Start to the Menus The following settings are available in your on-screen menus. For more details on how to use the menus, see “Using the Menus” on page 33. Menu Allows you to Video Audio Channel Parent Timer Setup Basic...
  • Page 119 Menu Allows you to Video Audio Channel Parent Timer Setup Basic Timer 1 : Off Timer 2 : Off Current Time Set the clock on your TV and program scheduled viewing using Timer 1 and Timer 2. Move: Select: End: Video Audio Channel Parent Timer...
  • Page 120: Using Picture In Picture (pip) With Remote Y181

    Operating Instructions Using Picture in Picture (PIP) with Remote Y181 The Picture-in-Picture (PIP) feature allows you to view two programs simultaneously, one in the full size “main” picture and one in a small “window” picture. Displaying Picture in Picture Indicates which picture is currently receiving sound Channel number of...
  • Page 121 PIP Functions buttons For KV-27FV300 model Yellow labeled Description PIP button Press to turn the PIP feature on and off. Press repeatedly to change the window size (1/9, 1/16, Off). Press to cycle through the available video equipment you have connected to the TV (in the PIP window picture).
  • Page 122: Using Picture In Picture (pip) With Remote Y182

    Operating Instructions Using Picture in Picture (PIP) with Remote Y182 The Picture-in-Picture (PIP) feature allows you to view two programs simultaneously, one in the full size “main” picture and one in a small “window” picture. Displaying Picture in Picture Indicates which picture is currently receiving sound Main picture channel number in green...
  • Page 123 PIP Functions buttons For KV-32FV300, KV-36FV300 model RM Y182 Yellow-labeled Description PIP Button Press to alternate sound between the main picture and the PIP window picture. The sound symbol (9) appears for 3 seconds, indicating whether you are hearing sound from the main picture or the PIP window picture. Press to move the location of the window picture to any of the four corners of the screen.
  • Page 124: Setups That Affect Your Ability To Use Pip

    Operating Instructions Setups that Affect Your Ability to Use PIP Any video equipment you have connected to the AUX input cannot be viewed in the PIP window. If you are viewing all channels through a cable box, the PIP feature will not work. The cable box only unscrambles one signal at a time, so the window picture will be the same as the main picture.
  • Page 125: Using Wireless Headphones

    Using Wireless Headphones Wireless headphones are included and can be used only with Sony TV models KV-32FV300 and KV36FV300. Installing the Battery Install the supplied size AA (R6) battery into the headphones. Open the battery compartment lid by pressing and sliding the lid as illustrated.
  • Page 126 Operating Instructions Using the Headphones Press icon and channel number display.) Place the headphones securely onto your head. Power indicator Volume control To listen to sound only from wireless headphones Turn down the TV speaker level, or press MUTING on the remote control. To turn off headphones Put down the headphones and press To ensure optimal sound reception with headphones...
  • Page 127 Listening to Sound from Main and PIP Window Pictures To use your headphones to listen to the sound from the main or window picture (when using PIP), select the audio source. If PIP is not displayed, press to display a PIP window. Press The i icon and channel number appear for about three seconds.
  • Page 129: Using The Menus

    Using the Menus This section shows the options available for setting up and adjusting the TV. Depending on the model of television that you have purchased, your remote control will have F f G g either a joystick (RM-Y182), or directional buttons ( ) and a button (RM-Y181).
  • Page 130: Using The Video Menu

    Operating Instructions Using the Video Menu To access the Video menu, refer to the following steps using the joystick To access the Video menu, refer to the following steps using the joystick of your remote control: of your remote control: Video Audio Channel Parent Timer...
  • Page 131: Using The Audio Menu

    Using the Menus Using the Audio Menu To access the Audio menu, refer to the following steps: Video Audio Channel Parent Timer Setup Basic To Display To Highlight To Select Adjust Treble Bass Balance Steady Sound: Off Effect: TruSurround MTS: Stereo Speaker: On Audio Out: Variable Press joystick...
  • Page 132 Operating Instructions Use the joystick to scroll up or down to select from one of the following Multi-Channel options, then press to select it. TV Sound Stereo: Select when viewing a broadcast in stereo. Auto SAP: Select to have the TV automatically switch to a Second Audio Program (SAP) when a signal is received.
  • Page 133: Using The Channel Setup Menu

    Using the Menus Using the Channel Setup Menu To access the Channel Setup menu, refer to the following steps: Video Audio Channel Parent Timer Setup Basic To Display To Highlight To Select Program Favorite Channels Cable : On Channel Fix: Off Auto Program Channel Skip/Add Channel Label...
  • Page 134 Operating Instructions Perform Auto Program whenever setting up your TV. Auto Program Auto program will search for available channels and program receivable channels. Use this feature after you run Auto Program to skip unwanted channels or Channel Skip/Add add new ones. Press to open Channel Skip/Add menu: Use the joystick to scroll up and down to select the position of the desired channel, then press...
  • Page 135: Using The Parent Menu

    Using the Menus Using the Parent Menu To access the Parent menu, refer to the following steps: Video Audio Channel Parent Timer Setup Basic To Display To Highlight To Select Password: Use 0-9 buttons to enter new password Move: End: Select: The Parental Control feature is designed to help parents monitor what their children watch on television.
  • Page 136: Parental Control

    Operating Instructions Parental Control Setting the Rating You can change the Rating by selecting one of the Parental Lock options. Video Audio Channel Parent Timer Setup Basic Parental Lock: Off Change Password Child Country: U.S.A. Youth Young Adult Custom Press to change settings End: Move:...
  • Page 137 Using the Menus Information for Parents To view a program that exceeds the TV rating Press , then use the buttons to enter your password. Entering your password to view a blocked program will temporarily turn Lock to Off. To reactivate your Lock settings, turn the TV off then back on;...
  • Page 138: Movie Rating

    Operating Instructions United States: Selecting Custom Rating Options For the United States, the Custom Rating Menu includes the following options: Movie Rating, TV Rating and Unrated. (For Canada, see page page 44.) Movie Rating This system defines the rating levels of movies shown in theaters and on prime cable channels.
  • Page 139 Using the Menus Unrated You have the option of blocking TV programs or movies that are not rated. Custom Rating Allow Allows all unrated programs Movie Rating TV Rating Block Blocks all unrated programs Allow Unrated: Allow Block Block or allow unrated programs Move: Select:...
  • Page 140 Operating Instructions Canada: Selecting Custom Rating Options For Canada, the Custom Rating Menu includes the following options: English Rating, French Rating and U.S.A. Rating. English Rating These ratings are for Canadian programs that are broadcast in English. Rating Defined as Custom Rating English Rating - C8+...
  • Page 141: Using The Timer Menu

    Using the Menus Using the Timer Menu To access the Timer menu, refer to the following steps: Video Audio Channel Parent Timer Setup Basic To Display To Highlight To Select Timer 1 : Set Timer 2 : Set Program Current Time Program the time Press joystick to highlight an option then press...
  • Page 142: Using The Setup Menu

    Operating Instructions Using the Setup Menu To access the Setup menu, refer to the following steps: Video Audio Channel Parent Timer Setup Basic To Display To Highlight To Select Caption Vision: Off Video Label Tilt Correction: 0 Language: English 16:9 Enhanced: Auto Text1 Demo Text2...
  • Page 143: Using The Basic Menu

    Using the Menus Using the Basic Menu To access the Basic menu, refer to the following steps: Basic Menu To Display To Highlight To Select Adjust Picture Caption Vision: Off Effect: TruSurround Advanced Menu Picture white level Press joystick to highlight an option then press Move: Select: End:...
  • Page 145: Other Information

    Other Information Programming the Remote Control You can use the supplied remote control to operate Sony or non-Sony video equipment. Press Press (FUNCTION). Use the buttons to key in the code number from the following chart. Press VCR codes Sony...
  • Page 146 314, 330, 336, 337 (M.Ward) SV2000 Zenith Sylvania 308, 309, 338, 310 Cable box codes Satellite receiver codes Sony Sony Hamlin/Regal 222, 223, 224, 225, 226 General Electric Jerrold/G. I. 201, 202, 203, 204, 205, 206, Hitachi 207, 208, 218...
  • Page 147 Other Information In some rare cases, you may not be able to operate your equipment with the supplied remote control. In this case, use the equipment’s supplied remote control. Operating a VCR Press Power on the VCR Select channels directly Change channels Play video tape Stop...
  • Page 148: Troubleshooting

    Operating Instructions Troubleshooting If you are having a problem with your TV, try the suggestions below. If the problem persists, contact your nearest Sony Dealer. Problem Possible Solutions Turn on the TV. While holding down the RESET button on the...
  • Page 149 Other Information Problem Possible Solutions Cable stations Make sure Cable is set to On in the Channel Setup menu (page 37). don’t seem to work Perform Auto Program to add channels that are not presently in the memory (page 21). Press TV (FUNCTION) when operating your TV.
  • Page 150 TV and timer LED flashes If, after reading these Operating Instructions, you have additional questions related to the use of your Sony television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (U.S. residents only) or (416) 499-SONY (7669)
  • Page 151: Specifications

    Other Information Specifications For all models (except as noted) Television system American TV standard/NTSC (KV-27FV300, KV-32FV300, KV-36FV300) Channel coverage VHF: 2-13/UHF: 14-69/CATV: 1-125 Antenna 75-ohm external antenna terminal for VHF/UHF ® Picture tube FD Trinitron tube Power requirements 120V, 60 Hz (KV-27FV300, KV-32FV300, KV-36FV300) Supplied Accessories Size AA (R6) batteries (2) Remote Control RM-Y181 (1) (KV-27FV300)
  • Page 152 Operating Instructions...
  • Page 153: Index

    Index 16:9 Enhanced Favorite Channels Audio Out Auto Program Auto SAP Language Balance Bass Menus Batteries Audio Inserting in remote Basic Inserting in wireless headphones Channel Setup Brightness Parent Setup Cable Timer Caption Vision Video Channel Fix Mode Channel Label Movie Channel Skip/Add Sports...
  • Page 154 Treble Troubleshooting Setting the Rating TV Features TV Front Panel Sharpness TV Rear Panel SLEEP RM-181 RM-Y182 V-Chip (see Parental Control) Speaker Video Label Specifications Steady Sound Wireless Headphones Batteries Tilt Correction Timer 1 and Timer 2...
  • Page 155 Important: Read this manual before using this product...
  • Page 157 En calidad de compañía asociada a PRECAUCIÓN ® ENERGY STAR , Sony ha determinado PARA EVITAR DESCARGAS ELÉCTRICAS, INTRODUZCA EL que este producto o modelo de ENCHUFE EN EL TOMACORRIENTE POR COMPLETO, CON EL producto cumple con las directrices de CONTACTO ANCHO DEL ENCHUFE EN LA RANURA ANCHA uso eficiente de energía de ENERGY...
  • Page 158 Manual de instrucciones Normas importantes Introducción de objetos y líquidos No introduzca objetos de ningún tipo a través de sobre seguridad las ranuras del gabinete, ya que podrían tocar puntos de tensión peligrosa o provocar Para su protección, lea detenidamente estas instrucciones y guarde este cortocircuitos de piezas, lo que podría resultar en manual para futuras consultas.
  • Page 159 Conexión de equipo adicional Reparación No coloque el televisor en un lugar cerrado, como en un librero o un mueble empotrado, Daños que requieren reparación a menos que esté adecuadamente ventilado. Desconecte el aparato de la toma de pared y haga que sea revisado por personal calificado cuando se produzcan las siguientes condiciones: No coloque el televisor cerca, ni sobre un Si el cable de...
  • Page 160 Manual de instrucciones...
  • Page 161 Contenido Introducción ® Características del televisor FD Trinitron WEGA ..............1 Acerca de este manual ........................2 Baterías para el control remoto ..................... 2 Controles del menú del panel frontal ..................2 Uso del control remoto........................3 Conexión del televisor Panel posterior del televisor......................
  • Page 163: Características Del Televisor Fd Trinitron Wega

    Introducción ® Gracias por la compra del televisor FD Trinitron WEGA de Sony. Antes de utilizar este manual, compruebe el número de modelo situado en la parte posterior del televisor o en la portada de este manual. Características del televisor FD Trinitron WEGA ®...
  • Page 164: Acerca De Este Manual

    Manual de instrucciones Acerca de este manual Este manual proporciona instrucciones para ayudarle a disfrutar de su nuevo televisor. Muestra como conectarlo a la antena o el cable, al decodificador de cable, a la videograbadora, al reproductor de DVD, al receptor de satélite, al sistema estéreo o a la cámara de video. Una vez conectado, siga las instrucciones y utilice el control remoto para acceder a los menús de pantalla.
  • Page 165: Uso Del Control Remoto

    Presione para desactivar el sonido. Presiónelo de MUTING nuevo o presione para restaurar el sonido. SYSTEM OFF Presiónelo para apagar todos los aparatos Sony al mismo tiempo. Es posible que no funcione con aparatos antiguos. TV/VCR Presiónelo cuando haya terminado de utilizar la videograbadora y desee pasar a la entrada de ANT/CABLE.
  • Page 166 Manual de instrucciones Botón Descripción Botones POWER Presiónelos para encender y apagar el equipo conectado. Botones Presiónelos para controlar el equipo conectado con su control remoto. FUNCTION PIP (imagen dentro Presiónelo para operar la función PIP. Consulte “Uso de de una imagen) Imagen dentro de una imagen (PIP)”...
  • Page 167: Conexión Del Televisor

    Conexión del televisor Lea esta sección antes de instalar el televisor por primera vez. Esta sección hace referencia a las conexiones básicas, así como a cualquier otro equipo opcional que conecte. Panel posterior del televisor MONITOR AUDIO OUT (VAR/FIX) Toma Descripción 1AUX Le permite ver los canales locales y de cable si su servicio de...
  • Page 168 Manual de instrucciones Toma Descripción 5 VIDEO/AUDIO (L/R) Establece una conexión con las tomas de salida de AUDIO y VIDEO de la videograbadora o de otro equipo de video. En el panel frontal del televisor existe una tercera toma de entrada de video (VIDEO 2).
  • Page 169: Conexiones Básicas

    Conexión del televisor Conexiones básicas Televisor con antena interior o exterior o cable CATV Dependiendo del cable que tenga, elija una de las siguientes conexiones: Si conecta el televisor a una antena interior o exterior, es posible que deba ajustar la orientación de la antena para obtener una mejor recepción.
  • Page 170: Conexiones Del Decodificador

    Manual de instrucciones Conexiones del decodificador Algunos sistemas de televisión por cable usan señales codificadas que requieren de un decodificador para poder ver todos los canales. Si está suscrito a ese tipo de servicio de cable, utilice esta conexión. Las señales codificadas que lleguen al televisor desde el decodificador no pueden verse en PIP.
  • Page 171 Presione el botón ANT del control remoto para alternar las entradas de decodificador y de cable directo. Su control remoto Sony puede programarse para que opere el decodificador (consulte la página 34). Si desea utilizar el decodificador para cambiar de canal, ponga el televisor en el canal 3 o 4. Ajuste la función Fijar Canal para asegurarse de que no cambia accidentalmente los canales por medio del...
  • Page 172: Conexión De Equipo Adicional

    Manual de instrucciones Conexión de equipo adicional Conexión de un televisor y una videograbadora Parte posterior del televisor Videograbadora Video (amarillo) Audio izquierdo (blanco) Audio derecho (rojo) Desde el cable/antena Conexión opcional Para ver programas de video desde la videograbadora, sintonice el televisor en los canales 3 ó 4 (como se indica en la parte posterior de la videograbadora).
  • Page 173 Conexión del televisor Conexión de un televisor, una videograbadora y un decodificador Utilice esta conexión si está suscrito a un sistema de cable que codifique algunos canales (canales de pago) pero no todos. Esta configuración le permite utilizar el control remoto para: cambiar de canal con el decodificador o la videograbadora mientras recibe una señal codificada cambiar de canal con el televisor...
  • Page 174 Manual de instrucciones Conexión opcional Si la videograbadora tiene salidas de video, podrá obtener una mejor calidad de imagen si conecta los cables de audio y video (no incluidos) desde la salida AUDIO y VIDEO OUT de la videograbadora a la toma de entrada AUDIO/VIDEO IN del televisor. Para obtener una mejor calidad de imagen, utilice S VIDEO en lugar del cable amarillo de audio y video.
  • Page 175 Conexión del televisor Conexión de un televisor y un receptor de satélite Parte posterior del televisor Desde el cable/ antena Receptor de satélite Cable de Video (amarillo) la antena Audio izquierdo (blanco) satelital Audio derecho (rojo) Conecte el cable de la antena por satélite a la entrada SATELLITE IN del receptor de satélite.
  • Page 176 Manual de instrucciones Conexión de un televisor, un receptor de satélite y una videograbadora Parte posterior del televisor Desde el cable/ antena Videograbadora Receptor de satélite Video (amarillo) Audio izquierdo (blanco) Audio derecho (rojo) Conecte el cable de la antena por satélite a la entrada SATELLITE IN del receptor de satélite.
  • Page 177 Conexión del televisor Conexión de un reproductor de DVD Use cables de audio y video (no incluidos) para conectar las tomas de AUDIO y VIDEO OUT del reproductor de DVD a las de VIDEO IN del televisor. Parte posterior del reproductor Parte posterior del televisor de DVD MONITOR...
  • Page 178 Manual de instrucciones Conexión de una cámara de video Conecte las tomas AUDIO y VIDEO OUT de la cámara de video a las de AUDIO y VIDEO IN del televisor con cables de audio y video (no incluidos). Panel de audio y video frontal S VIDEO Audio derecho (rojo) Audio izquierdo (blanco)
  • Page 179: Uso De Las Funciones Básicas

    Uso de las funciones básicas Ajuste automático del televisor Cuando haya terminado de conectar el televisor, puede ajustar los canales con la opción de Autoprogramación. Presione para encender el televisor. Aparece la pantalla Ajustes iniciales. Ajustes iniciales Autoprogramación: [CH+] [CH–] Salir: Primero conecte el cable o la antena...
  • Page 180: Acceso Rápido A Los Menús

    Manual de instrucciones Acceso rápido a los menús Los ajustes siguientes están disponibles en los menús de pantalla. Para obtener más detalles sobre el uso de los menús, consulte “Uso de los menús” en la página 23. Menú Permite Video Audio Canal Bloqueo Timer Ajustes Basico...
  • Page 181 Uso de las funciones básicas Menú Permite Video Audio Canal Bloqueo Timer Ajustes Basico Timer 1 : No Timer 2 : No Hora Actual Ajustar el reloj del televisor y programar el encendido y apagado automático en un canal establecido mediante Timer 1 y Timer 2 (Reloj 1 y Reloj 2).
  • Page 182: Uso De Imagen Dentro De Una Imagen (pip)

    Manual de instrucciones Uso de Imagen dentro de una imagen (PIP) La función de Imagen dentro de una imagen (PIP) le permite ver dos canales al mismo tiempo, uno en tamaño completo en la pantalla del televisor, y otro en una ventanilla dentro de la pantalla del televisor.
  • Page 183 Uso de las funciones básicas Si la función PIP no funciona correctamente con el televisor o el equipo de video conectado a él, consulte la sección de Solución de problemas que comienza en la página 36 para ver posibles soluciones. Si tiene problemas con la función PIP, consulte la sección “Ajustes que pueden afectar el uso de Imagen dentro de una imagen PIP”...
  • Page 184: Ajustes Que Pueden Afectar El Uso De Imagen Dentro De Una Imagen (pip)

    Manual de instrucciones Ajustes que pueden afectar el uso de Imagen dentro de una Imagen (PIP) No podrá verse en la ventanilla PIP ningún equipo de video que tenga usted conectado a la entrada AUX. PIP no funcionará si está usted viendo todos los canales a través de un decodificador. Este dispositivo decodifica una sola señal a la vez, por lo que la imagen en la ventanilla será...
  • Page 185: Uso De Los Menús

    Uso de los menús Esta sección muestra las opciones disponibles para configurar y ajustar el televisor. Para accesar a un menú Presione para ver el menú en pantalla. Utilice los botones para seleccionar el menú deseado y después presione Utilice los botones para seleccionar la opción deseada y después presione Siga las indicaciones que aparecen en pantalla para activar las opciones deseadas.
  • Page 186 Manual de instrucciones Uso del Menú Video Para accesar al menú Video, siga los siguientes pasos: Video Audio Canal Bloqueo Timer Ajustes Basico Para mostrar Para seleccionar Modo : Vívido Vívido Estándar Contraste Película Brillo Deportes Color Tinte Nitidez Temp. Color: Frío ClearEdge VM: Alto DynaBlack: Alto Preferencia personal...
  • Page 187 Uso de los menús Uso del Menú Audio Para accesar al menú Audio, siga los siguientes pasos: Video Audio Canal Bloqueo Timer Ajustes Basico Para mostrar Para resaltar Para seleccionar Agudos Ajustar Graves Balance Auto Volumen: Sí Efecto: WOW MTS: Estéreo Bocinas: Sí...
  • Page 188 Manual de instrucciones Presione para seleccionar una de las siguientes opciones: Sonido Estéreo: Seleccione esta opción cuando vea una emisión en estéreo. Multicanal Mono: Seleccione esta opción para reducir el ruido en zonas de del televisor difícil recepción. Auto SAP: Seleccione esta opción para que el televisor cambie automáticamente al Segundo Programa de Audio (SAP) al recibir la señal.
  • Page 189 Uso de los menús Uso del Menú Canal Para accesar al menú Canal, siga los siguientes pasos: Video Audio Canal Bloqueo Timer Ajustes Basico Para mostrar Para resaltar Para seleccionar Programar Canales Favoritos Cable : No Fijar Canal: No Autoprogramación Omitir/Añadir Canal Nombre del Canal Programar sus...
  • Page 190 Manual de instrucciones Omitir/Añadir Utilice esta función después de ejecutar Autoprogramación para omitir los canales no deseados o para añadir nuevos canales. Canal Presione para seleccionar la posición del canal deseado y después presione Presione para omitir o añadir canal y después presione Presione para volver al menú...
  • Page 191: Bloqueo De Canal

    Uso de los menús Uso del Menú Bloqueo de Canal Para accesar al menú Bloqueo de Canal, siga los siguientes pasos: Video Audio Canal Bloqueo Timer Ajustes Basico Para mostrar Para resaltar Para seleccionar Bloqueo de Canal 1: No 2: No 3: No 4: No Acceso paterno a los...
  • Page 192: Uso Del Menú Timer (reloj)

    Manual de instrucciones Uso del Menú Timer (Reloj) Para accesar al menú Timer, siga los siguientes pasos: Video Audio Canal Bloqueo Timer Ajustes Basico Para mostrar Para resaltar Para seleccionar Timer 1 : No Timer 2 : No Hora Actual Programar Programar la hora Mover:...
  • Page 193 Uso de los menús Uso del Menú Ajustes Para accesar al menú Ajustes, siga los siguientes pasos: Video Audio Canal Bloqueo Timer Ajustes Basico Para mostrar Para resaltar Para seleccionar Caption Vision: No Etiqueta de Video Rotación: 0 Idioma: Español Modo 16:9:Auto Text1 Text2...
  • Page 194 Manual de instrucciones Uso del Menú Básico Para accesar al menú Básico, siga los siguientes pasos: Menu Básico Para mostrar Para resaltar Para seleccionar Ajustar Contraste Caption Vision: No Efecto: WOW Menú Avanzado Intensidad blanca Presione para resaltar la opción deseada y después Mover: Seleccionar: Salir:...
  • Page 195: Información Adicional

    Información adicional Programación del control remoto Puede utilizar el control remoto incluido con equipos de video Sony y de otros proveedores. Presione Presione (FUNCTION). Utilice los botones para introducir el número de código según la siguiente tabla. Presione Códigos de videograbadora...
  • Page 196 314, 330, 336, 337 (M.Ward) SV2000 Zenith Sylvania 308, 309, 338, 310 Códigos de decodificadores de cable Códigos de receptor de satélite Sony Sony Hamlin/Regal 222, 223, 224, 225, 226 General Electric Jerrold/G. I. 201, 202, 203, 204, 205, 206, Hitachi...
  • Page 197 Información adicional En casos excepcionales, es posible que no pueda utilizar el equipo con el control remoto incluido. En tal caso, utilice el control original de dicho equipo. Uso de una videograbadora Presione Para Encender la videograbadora Seleccionar los canales directamente Cambiar de canal Reproducir cintas de video Detener el funcionamiento...
  • Page 198: Solución De Problemas

    Manual de instrucciones Solución de problemas Si tiene problemas con el televisor, intente seguir las indicaciones que se sugieren a continuación. Si el problema persiste, consulte con su proveedor Sony más cercano. Problema Posibles Soluciones Encienda el televisor. Mientras mantenga oprimido el botón RESET del...
  • Page 199 Caption Vision (subtítulos). Si desea ver subtítulos, escoja CC1 en lugar de Texto 1-4. Si después de leer este manual de instrucciones, tiene más preguntas relacionadas con el uso del televisor Sony, póngase en contacto con su proveedor Sony más cercano para recibir asistencia técnica.
  • Page 200: Especificaciones

    Manual de instrucciones Especificaciones Sistema de televisión Estándar de televisión estadounidense /NTSC Cobertura de canales VHF: 2-13/UHF: 14-69/CATV: 1-125 Antena Terminal de antena externa para VHF/UHF de 75 ohm ® Tubo de imagen Cinescopio FD Trinitron Requisitos de alimentación ca 120 V 60 Hz para todos los países excepto ca 220 V 50/60 Hz (Chile, Perú, Bolivia) en donde se indique:...
  • Page 201: Índice Alfabético

    Índice alfabético Agudos Fijar Canal 17, 27 Autoprogramación Auto Sap Graves Auto Volumen Hora actual Balance Bloquear o desbloquear Idioma 31 Bocinas Imagen dentro de una Imagen (PIP) Brillo Instalación de baterías 2 Cable Menús Canales Favoritos Ajustes Caption Vision Audio Caracteristicas del televisor Básico...
  • Page 202 Self Diagnosis Supported model MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-27FV300 RM-Y181 SCC-S65AA KV-27FV300 RM-Y181 SCC-S64AA KV-29FV300 RM-Y181 LATIN NORTH SCC-S62BA KV-29FV300 RM-Y181 LATIN SOUTH SCC-S62CA KV-32FV300 RM-Y182 SCC-S65BA KV-32FV300 RM-Y182 SCC-S64BA KV-36FV300 RM-Y182 SCC-S65CA KV-36FV300 RM-Y182 SCC-S64CA KV-36FV300 RM-Y182 HAWAII SCC-S67AA...
  • Page 203 KV-27FV300/29FV300/32FV300/36FV300 A BOARD SCHEMATIC DIAGRAM — — — — — — — — — — — — — — — — 31 —...
  • Page 204 BA-5D SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-27FV300 RM-Y181 SCC-S65AA KV-27FV300 RM-Y181 SCC-S64AA KV-29FV300 RM-Y181 LATIN NORTH SCC-S62BA KV-29FV300 RM-Y181 LATIN SOUTH SCC-S62CA KV-32FV300 RM-Y182 SCC-S65BA KV-32FV300 RM-Y182 SCC-S64BA KV-36FV300 RM-Y182 SCC-S65CA KV-36FV300 RM-Y182 SCC-S64CA KV-36FV300 RM-Y182 HAWAII SCC-S67AA...
  • Page 205 6-6. Picture Tube (KV-36FV300 ONLY) INCORRECT CORRECT REF. NO. PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTION 4-087-375-01 DOOR, CONTROL 4-087-375-11 DOOR, CONTROL Sony Corporation English Sony Technology Center 2002JJ74WEB-1 Technical Services Printed in USA Service Promotion Department © 2002.10 9-965-924-92...

Comments to this Manuals

Symbols: 0
Latest comments:
  • FRANK Aug 28, 2019 01:41:
    MAQUINA PARA SONY WEGA TRINITRON DE 21 PULGADAS
  • FRANK Jun 17, 2019 11:50:
    DISCULPE TENGO UNA TV SONY WEGA DE 21 Y NO PRENDE SEGUN ME DIJIERON QUE ESTA MAL LA MAQUINA CIMO PUEDO CONSEGUIR ESO