Vcr Connections - Sony Trinitron WEGA KV-27FV15 Operating Instructions Manual

VCR Connections
Connecting an antenna/cable TV
system with a VCR
1 Attach the coaxial connector from your
cable or antenna to IN on your VCR.
2 Using A/V connectors, connect AUDIO
and VIDEO OUT on your VCR to AUDIO
and VIDEO IN on your TV.
3 Using a coaxial connector, connect OUT on
your VCR to VHF/UHF on your TV.
frp cas :
If you are connecting a monaural VCR, connect only the
single white audio output to the left input on your TV.
Connecting a VCR and TV with a
cable box
1 Connect the coaxial cable from the wall to
IN on your cable box .
2 Using a coaxial connector, connect OUT on
your cable box to IN on your VCR.
3 Connect a coaxial cable (not supplied)
from the OUT jack on your VCR to
VHF/UHF on your TV.
4 Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV.
For optimum picture quality, use S VIDEO
instead of the yellow A/V cable. S VIDEO
Rear oft TV)
VIDEO IN
1 z
does not provide sound, your audio
connectors must still be connected.
fo)
To
CONVERTER
3 > Coaxial cable
Cable/ VCR
1 antenna [J our AUDIO A AUDIO L VIDEO
UNE
ee Ail ©} * a OOoO®d
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
)
Ta
CONVERTER
3 cosalal cabh
VC R VHF/UHF
(| our AUDIO R AUDIO VIDEO
3 n t @O@®
2 us
Cable "a
5 =i [| 6 Cabie box
AUDIC-F (red)
AUDIG-L (white!
VIDEO lyeilow)