Table of Contents
Advertisement
When the button has been pressed, the unit will make an audible sound and a 'PLEASE WAIT' message will be
displayed on the screen which will count down from 3. The number of satellites will then be displayed as '00' and GPS
status will show 'SEARCHING FOR SATELLITES' until the satellite lock has been acquired. It will take approximately
25 to 30 seconds for the unit to reacquire the satellite lock.
The 4 LEDs at the top of the unit provide visual feedback dependent on what process is being performed:
Function
Behaviour
Accel/
If Alert at End is enabled, the LEDs will flash green for 0.5 s
Decel
once the test end criteria are met.
Mode
Lap Timing
The LEDs provide a live reference lap speed comparison (Delta-
Mode
V).
The current lap is > 5 km/h quicker than the reference lap
The current lap is 2.5 km/h quicker than the reference lap
The current lap is the same speed as the reference lap
The current lap is 2.5 km/h slower than the reference lap
Colour
9
Advertisement
Table of Contents
