Racelogic RLVBTOUCH-M Quick Start Manual page 12

3. When the unit has booted, select the Mode Button
and press LAP TIMING if it is not already selected.
7. Select the Settings Button
, then the Lap Timing option and navigate to the Track Settings. The unit will display the currently selected track
based on the GPS location. If multiple layouts are available, you can press the Select button to scroll through the
different options. Ensure that the correct circuit is selected!
10. If you are intending to use the serial output from the top CAN/Serial port to conduct Online Testing with VBOX
Test Suite or output lap timing parameters, go to Serial Output within the Serial Port Settings and change the
Output Mode to either VBOX Stream (live testing with VBOX Test Suite) or Lap Timing.
Note: Ensure correct hardware connections are made.
12