Table of Contents
Advertisement
13. Select which Lap Timing display you would like to be shown (Main or Basic) by selecting
the Forward and Back arrows on the bottom right of the screen or by swiping the screen left or right.
14. The unit is now ready to display live Lap Timing values.
Main Screen:
• Once the start/finish line is crossed, VBOX Touch will automatically begin to create a reference lap. When a
reference lap is being created, a 'Creating a Reference Lap' message is displayed within the Delta-T section and
the reference lap section will show a rolling lap time. The LEDs will also illuminate
process. The reference lap will update if a faster lap is achieved unless the Reference Lap has been Fixed within
the Settings.
• Once a reference lap has been created, the unit presents a live difference in lap time (Delta-T) between the current
lap time and the stored and active reference lap at the current location on the track.
• The 4 LEDs at the top of the screen provide a live reference lap speed comparison (Delta-V), varying in
colour between
green
the current location on track. The settings for this can be changed within the Delta-V Range settings.
Main screen
and
red
depending on whether you are travelling faster or slower than the reference lap at
Basic screen
blue
during the creation
14
Advertisement
Table of Contents
