Page 2
Supplied Parts List Shelf Support Stand Wrench A(x1) B(x2) C(x4) D(x1) Right Bracket Drawer Left Bracket Strap E(x1) F(x1) G(x1) H(x2) Step 1 Place Shelf on a flat surface with bottom upward as the image shown. Caution: Please make sure Shelf A is in the same direction as the image shown ( Tip: Check the letter L&R facing the direction).
Page 3
Step 3 Firmly hold the assembled drawer and insert it to the screw on Shelf as the image shown. Step 4 Please make sure the arrow on the brackets are pointing to the cable slots on the Shelf...
Page 4
Step 5 Insert Support Stand to the screw on Shelf . Fix the Support Stand using Nut and tighten with Wrench Not Overtighten).