Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Mercia Garden Products Manuals
  4. Garden Houses
  5. 010VLPA0305SDNW-V1
  6. Quick start manual

Mercia Garden Products 010VLPA0305SDNW-V1 Quick Start Manual

3x5 overlap apex shed
Hide thumbs

Advertisement

Quick Links

Download this manual
x2
2mm Drill bit

Advertisement

loading
Need help?

Need help?

Do you have a question about the 010VLPA0305SDNW-V1 and is the answer not in the manual?

Questions and answers

Related Manuals for Mercia Garden Products 010VLPA0305SDNW-V1

Summary of Contents for Mercia Garden Products 010VLPA0305SDNW-V1

  • Page 1 2mm Drill bit...

  • Page 2: Any Questions

    PLEASE SCAN HERE: ANY QUESTIONS? Scan code contact us via our customer portal.
  • Page 3 ACCESSING VIDEO GUIDES... ACCESSING VIDEO GUIDES... 3. Scan QR code... Some steps within this set of instructions come with an added video guide for your convenience. These can be accessed via the QR code and used to aid you in constructing that step.
  • Page 4 Before assembly Ridge Bar - 28x28x744mm QTY 1 please make sure you have a F2828-744mm suitable base ready to erect your building Eave Frame - 28x28x835mm QTY 2 F2828-835mm Fascia - 12x60x851mm QTY 4 S1260-851mm MADE IN GREAT BRITAIN Door Strip - 12x28x1590mm QTY 2 Overall Dimensions: Base Dimensions: S1228-1590mm...
  • Page 5 Pre Assembly Step 2 IMPORTANT: Pre-drill before xing screws. PLEASE SCAN HERE: Parts Needed - No. 4 QTY 1 Before assembling remove the transportation blocks from the bottom of each Place the Floor (No. 4) onto a rm and panel. level base.
  • Page 6 Step 4 IMPORTANT: Pre-drill before xing screws. Step 6 IMPORTANT: Pre-drill before xing screws. Parts Needed - No. 1 QTY 1 Parts Needed - No. 5 QTY 2 No. 2 QTY 1 No. 8 QTY 2 Rest the assembled door gable (No.1) Attach an Eave frame (No.
  • Page 7 Step 8 Step 9 IMPORTANT: Pre-drill before xing screws. Parts Needed - No. 16 QTY 1 Parts Needed - No. 11 QTY 4 Cut the felt into 1 sheet measuring Fix the cover trims (No. 11) to the 1413mm (L) x 1000mm (W) and lay onto corners of the building, securing the roof, allowing approximately 50mm each trim using 3x30mm screws.
  • Page 8 Step 11 IMPORTANT: Pre-drill before xing screws. Parts Needed - No. 10 QTY 2 Locate the door strips (No. 10) to the inside of the door gable, as shown. Fix each strip into place using 4x30mm screws. 8x30mm Screws It is ESSENTIAL that you apply wood treatment immediately after the building 30mm has been assembled.
  • Page 9 PLEASE SCAN HERE: ANY QUESTIONS? Scan code contact us via our customer portal.