Advertisement
Assembly and Disassembly
'Supply Voltages
Knife contacts A: 4, 5, 7 and 8
Mlustration
[3
A4/A7
+12V
operating voltage
If you want to switch the car radio on or
off with the ignition lock*:
Connect knife contact A 7 to clamp 15 of
the vehicle. You must then connect the
knife contact A 4 to the clamp 30.
If you do not want to connect the car
radio via the ignition lock:
Connect knife contact A 7 to clamp 30
of the vehicle. The knife contact A 4
doesn't need to be connected.
* Switching the car radio on and off
with the ignition lock is not possible
for vehicles from the companies
VW/Audi after model year 1991.
Never connect knife contact A 7 to
the S contact (supply plug PIN 4 —
cable brown/red) of the vehicle!
A5
+12 V control voltage max.
1A
For automatic aerials (extend/retract),
service amplifiers (switch on/off) etc.
and operating voltage for aerial
amplifiers.
A8
- operating voltage
Connect to clamp 31 (mass) of the
vehicle.
Loudspeakers
Knife contact B: 1 to 8
Ilustration
[3
Maximum Output
-4x4Q:
Peak
4x 10W
Sine, DIN 45324.
4x 5W
~ 2x2Q (2 parallel loudspeakers
each) :
38
Peak
2x 20W
Sine, DIN 45324
2x 10W
~2x4Q:
Peak
- 2xl2W
Sine, DIN 45324
2x 6W
B3 > right+
Bl
right+
B4
right-
B2 > right-
B5
left+
B7
left+
Bé
left-
B8
left-
Fuse
Mlustration (3)
Fuse 5A (plugged).
Inserting Unit —
Iustration
[4
Removing Unit
Mustration
[4
Advertisement
