Advertisement
Setting transmitters / programmes
Search or Manual
Before: " selecting range"
Search
[<1] for lower frequencies
[>] for higher frequencies
sensitivity (3 levels
Shortly press [€] or [>] button:
The search stops...
— in the first sweep only for extremely
well-received transmissions (on the
entire frequency range) (short
distance reception),
— in the second sweep for all well-re-
ceived receptions and
~ inthe third sweep for all receptible
transmissions (short and long distance
reception) ; DX in the display.
If you want to listen to another broad-
cast, press the
button or [>] button
again. Within ca. 60 seconds in the
second or third sweep, since the search
sensitivity will otherwise resemble that
of the first sweep.
Immediately highest search sensitivity:
Press [BX] button:
DX
appears in display.
The sender search stops at all receptible
transmitters (short and long distance
reception).
Manual
(not possible in RDS ranges)
Switching from search to manual :
Press [Px] -button until
MAN
appears in display.
[>] button: frequency higher
[<] button: frequency lower
Shortly press button:
gradual frequency change.
Press button longer:
fast frequency change.
Switch from manual to search:
Press [Bx] -button until
MAN disappears from display,
or press a station or range button.
3]
Advertisement
