Advertisement
6xU
VHF
32
Saving
Press the desired station buttons
7] — [4] until, following a short silent
switching time, the set transmitter is
audible again.
The selectea status of the announcement
readiness (TP ON or OFF) is taken over
when saved.
The transmitter or the programme is
saved. A transmitter/programme of the
same range previously saved there is
erased.
The memory contents remain even after
shutting off the operating voltage.
Callin up stations.
Before: " Selecting range"
You hear the programme or transmitter
last set in this range (last station
memory). The announcement readiness
TP is switched on or off according to the
previous storage.
If the set RDS programme can no longer
be received with sufficient RDS quality,
the RDS search starts automatically.
During the search:
SEARCH appears in display.
Calling Up
Press the desired station button
q —{
8),
You will see displayed . . .
... in the RDS ranges
the programme names, the selected
RDS range, TP (if saved) and the
number of the station button.
... inthe U range
the reception frequency, the wave range
and the number of the station button.
Advertisement
