Loading The Batteries - Nikon Motor Drive MD-12 Instruction Manual

LOADING THE BATTERIES
The MO-12 is powered by eight l.5V penlight (AA
size) batteries which are housed in the unit's battery
chamber. To load or replace batteries, turn the coin-
slotted locking screw on the battery chamber lid
counterclockwise. The lid will come loose and the bat-
tery clip, which forms a single unit with the lid, can be
removed. Load the batteries, taking care that they are
inserted correctly. Referring to the diagrams on the
sides of the clip that show the correct way to insert the
batteries, ensure that the positive
(+)
and negative (- )
terminals of the batteries are properly positioned. If
the batteries are loaded incorrectly, not only will they
be depleted - the motor drive cou Id also be damaged .
When the batteries are correctly positioned, replace the
battery clip. Push the chamber lid down gently until it
seats correctly; then, tighten the locking screw on the
lid with a coin or similar object until the battery clip
fits securely into the battery chamber.